Catalog Number CDC-45703-XPN1A |
Device Problem
Material Deformation (2976)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/01/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).
|
|
Event Description
|
It was reported "after the line with the brown cap was used for ct with contrast the line became flat.The icu team removed the central line and inserted a new one.There was no harm to the patient." no medical intervention required.The patient's current condition is reported as "fine".
|
|
Event Description
|
It was reported "after the line with the brown cap was used for ct with contrast the line became flat.The icu team removed the central line and inserted a new one.There was no harm to the patient." no medical intervention required.The patient's current condition is reported as "fine".
|
|
Manufacturer Narrative
|
(b)(4).The customer provided one photo for evaluation.The report of an extension line stretched/ballooned was confirmed through inspection of the supplied photo.The photo shows a stretched/ballooned distal extension line.The customer also returned one 3-l cvc for evaluation.Signs of use were observed on the catheter body and inside the extension lines.Visual inspection revealed the distal extension line was stretched/ballooned partially down the extrusion.The observed damage appears consistent with unintentional over pressurization of the extension line during use.The stretched portion of the extension line measured 0-70mm from the luer hub.The distal extension line outer diameter in a non-stretched area measured 0.08564" which is within the specifications of 0.084"-0.088" per product drawing.The distal extension line inner diameter could not be accurately measured due to the damage.Functional inspection was performed per the product instructions for use which states "flush each lumen with sterile normal saline for injection to establish patency and prime lumen(s)." the distal extension line was flushed using a lab inventory 10ml syringe.Water exited out the catheter as expected.No leaks or blockages were observed.A device history record review was performed with no relevant findings.The instructions for use (ifu) provided with this kit warns the user, "precaution: do not exceed ten (10) injections or catheter's maximum recommended flow rate located on product labeling and catheter luer hub to minimize the risk of catheter failure and/or tip displacement.Precaution: pressure limit settings on injector equipment may not prevent over pressurizing an occluded or partially occluded catheter.Precaution: warm contrast media to body temperature prior to pressure injection to minimize the risk of catheter failure." the customer report of a stretched/ballooned extension line was confirmed through complaint investigation of the returned sample.Visual inspection revealed the distal extension line was partially stretched/ballooned.The observed damage is consistent with over pressurization of the extension line during use.The catheter met all relevant dimensional and functional requirements, and a device history record review based on a potential lot from sales history was performed with no relevant findings.Based on these circumstances , unintentional use error (overpressure) likely caused or contributed to this event.Teleflex will continue to monitor and trend for complaints of this nature.
|
|
Search Alerts/Recalls
|