MAUDE Adverse Event Report: SANMINA -SCI SYSTEMS O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number BI70002000

Device Problems Mechanical Problem (1384); Application Program Freezes, Becomes Nonfunctional (4031)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/19/2024

Event Type  malfunction  

Event Description

Medtronic received information regarding an imaging system being used outside of a procedure.It was reported that the system went into e-stop while driving in a hallway.They found that the dongle was loose and the screws were broken on the system.The x-ray tech was able to plug the dongle back in and system cleared e-stop. there was no patient involvement.

Manufacturer Narrative

Continuation of d10: section d information references the main component of the system.Other relevant device(s) are: bi71000210, lot number: unknown h3/h6: the system was serviced in the field and the dongle and screws were replaced.Codes b01, c07, and d02 apply.H6: code a05 is for - the dongle was loose and the screws were broken.Code a110201 is for - the system went into e-stop while driving in a hallway.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Type of Device: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer (Section G): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 18800495
• MDR Text Key: 337592975
• Report Number: 3006544299-2024-00163
• Device Sequence Number: 1
• Product Code: OWB
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K200074
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial
• Report Date: 02/28/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 02/28/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/19/2024
• Date Device Manufactured: 05/29/2021
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1
• Treatment: "SEE H11...."