MAUDE Adverse Event Report: AOMORI OLYMPUS CO., LTD. THUNDERBEAT 5 MM, 35 CM, FRONT-ACTUATED GRIP TYPE S; ULTRASONIC SURGICAL DEVICE

Model Number TB-0535FCS

Device Problem Material Separation (1562)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/08/2024

Event Type  malfunction  

Manufacturer Narrative

The device was returned, and the evaluation found no additional reportable malfunctions.Should additional relevant information become available, a supplemental report will be submitted.

Event Description

It was reported the thunderbeat with front-actuated grip type s insulation tissue pad was separated from the upper-jaw.The issue occurred during a therapeutic, myomectomy which was completed with a similar device.There were no reports of patient harm or impact.

Manufacturer Narrative

This report is being supplemented to provide additional information based on the legal manufacturer's final investigation.Correction to h6 (added code 10 which was inadvertently missed on the initial medwatch).A review of the device history record found no deviations that could have caused or contributed to the reported issue.Based on the results of the investigation, the exact cause has not been identified, but it is possible that the peeling of the tissue pad occurred due to the following mechanism(s): 1)during the output activation in seal & cut mode, nothing was grasped in between the grasping section and the distal end of the probe (this includes after tissue resection).Therefore, the tissue pad was worn out.2) due to friction between the grasping section and the distal end of the probe, abnormal heat was generated.This might have caused the tissue pad to partially peel off.The event can be detected/prevented by following the instructions for use which state: "do not activate output in seal & cut mode while the grasping section is closed without contacting tissue or vessel or ensuring that tissue is transected.Otherwise, a local increase of the temperature due to a friction between the probe tip and the grasping section may result in various forms of damage in the probe tip and/or the tissue pad, such as premature wear, breakage, deformation, and/or falling off inside the body cavity and/or partial separating.When cutting and vessel sealing is performed in seal & cut mode, apply light tension on the tissue so that users can confirm it is transected.Also, stop activation immediately after tissue is transected.Otherwise, the grasping section, the tissue pad, or the probe tip may break and fall off, and partial separating of the tissue pad may occur due to a local increase of temperature caused by the friction between tissue pad and the probe tip during activation".Olympus will continue to monitor field performance for this device.

• Brand Name: THUNDERBEAT 5 MM, 35 CM, FRONT-ACTUATED GRIP TYPE S
• Type of Device: ULTRASONIC SURGICAL DEVICE
• Manufacturer (Section D): AOMORI OLYMPUS CO., LTD.; 2-248-1 okkonoki; kuroishi-shi, aomori 036-0 357; JA 036-0357
• Manufacturer (Section G): AOMORI OLYMPUS CO., LTD.; 2-248-1 okkonoki; kuroishi-shi, aomori 036-0 357; JA 036-0357
• Manufacturer Contact: todd brill ; 800 west park drive; westborough, MA 01581 ; 5082077661
• MDR Report Key: 18836524
• MDR Text Key: 337018356
• Report Number: 9614641-2024-00568
• Device Sequence Number: 1
• Product Code: GEI
• UDI-Device Identifier: 04953170409677
• UDI-Public: 04953170409677
• Combination Product (y/n): N
• Reporter Country Code: KS
• PMA/PMN Number: K211838
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other,Foreign,User Facility
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial
• Report Date: 03/05/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/05/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: TB-0535FCS
• Device Lot Number: 38K04
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/04/2024
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 02/20/2024
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1