MAUDE Adverse Event Report: MEDOS INTERNATIONAL SARL ENTERPRISE2 4MMX16MM; INTRACRANIAL NEUROVASCULAR STENT

Catalog Number ENCR401612

Device Problem Activation Failure (3270)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 02/21/2024

Event Type  malfunction  

Manufacturer Narrative

Manufacturer¿s ref.No: (b)(4).Information regarding patient identifier, date of birth, age, gender, weight, race, and ethnicity were not provided.Section e.1: the initial reporter phone: (b)(6).The initial reporter email address was not available / reported.Based on complaint information, the device is not available to be returned for analysis.(b)(6) medical performed a review of the device history records relative to the manufacturing, inspection, and packaging of the lot 8314211.The history record indicates this product was final inspection tested at lake region medical and was determined to be acceptable.Product analysis cannot be conducted as the product was not returned for analysis.No determination of causes and possible contributing factors could be made.As such, the investigation will be closed.With the information available and without the complaint product available to be returned for analysis, the reported product issue documented in the complaint cannot be confirmed through functional evaluation and analysis.Based on the manufacturing documentation review, there is no indication that the event is related to the device manufacturing process.Assignment of root cause for the event remains speculative and inconclusive, based on the limited information provided and without the return of the complaint device; however, it is possible that clinical and procedural factors, including device manipulation / interaction may have contributed to the reported failure.As part of the post market surveillance program, information from this complaint is trended for statistical signals and corrective / preventive action may be triggered at a later time.Since there was no evidence to suggest the event was related to a manufacturing or design issue, no corrective actions will be taken at this time.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by cerenovus, or its employees that the report constitutes an admission that the product, cerenovus, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Missing information from this report is identified as blank; this information was not provided in the reported event or available at the time of report submission.The manufacturer will submit a supplemental report if new facts arise which materially alter information submitted in a previous mdr report.Additional information will be submitted within 30 days of receipt.

Event Description

The healthcare professional reported that during a stent-assisted aneurysm embolization procedure, a 4mm x 16mm enterprise 2 vascular reconstruction device (vrd) (encr401612 / 8314211) was placed in the target site and the physician attempted to release the stent.The distal stent markers did not fully open nor expand as intended.The physician retracted the stent and replaced it with a new device to complete the procedure using the original concomitant microcatheter (unspecified brand).There was no report of any negative patient impact.On 01-mar-2024, additional information was received.Per the information, the target aneurysm was an unruptured lobulated aneurysm located on the left middle cerebral artery bifurcation.There were no vessel nor aneurysm factors that may have contributed to the incomplete expansion of the stent.There was no evidence of obstructed blood flow due to the reported event.The temperature indicator label on the inner pouch had been checked and confirmed to be within acceptable criteria.The microcatheter used was a prowler select plus.There was no resistance during the advancement of the stent.When the device was removed from the patient, the stent component was still on the delivery wire.The replacement stent was another 4mm x 16mm enterprise 2 vascular reconstruction device (encr401612).The additional information confirmed there was no negative patient impact.The reported issue did not result in any procedure delay.

• Brand Name: ENTERPRISE2 4MMX16MM
• Type of Device: INTRACRANIAL NEUROVASCULAR STENT
• Manufacturer (Section D): MEDOS INTERNATIONAL SARL; chemin-blanc 38; le locle neuchatel CH-24 00; SZ CH-2400
• Manufacturer (Section G): CERENOVUS, INC.; 325 paramount dr; raynham MA 02767
• Manufacturer Contact: kate karberg ; 31 technology dr; irvine, CA 92618 ; 303552-689
• MDR Report Key: 18871636
• MDR Text Key: 337661546
• Report Number: 3008114965-2024-00265
• Device Sequence Number: 1
• Product Code: NJE
• Combination Product (y/n): N
• Reporter Country Code: CH
• PMA/PMN Number: H60001
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial
• Report Date: 03/08/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/08/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: ENCR401612
• Device Lot Number: 8314211
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 02/21/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 06/14/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: MICROCATHETER