MAUDE Adverse Event Report: EDWARDS LIFESCIENCES EDWARDS INSPIRIS RESILIA AORTIC VALVE; HEART-VALVE, NON-ALLOGRAFT TISSUE

Model Number 11500A

Device Problem Perivalvular Leak (1457)

Patient Problem Insufficient Information (4580)

Event Date 02/21/2024

Event Type  Injury  

Manufacturer Narrative

H10: additional manufacturer narrative: the subject device is not available for evaluation, as it remains implanted in the patient.The investigation is still in progress; therefore, a conclusion has yet to be established.A supplemental report will be submitted accordingly upon investigation completion.Edwards will continue to review and monitor all reported events.Trends are monitored on a monthly basis and if action is required, appropriate investigation will be performed.

Event Description

It was reported that a patient with a 29mm 11500a aortic valve, implanted for five (5) months , underwent a valve-in-valve procedure due to severe pvl.The procedure was performed with a 29mm 9755rsl valve.

Manufacturer Narrative

H10: additional manufacturer narrative: updated sections: d4 (expiration date), g3, g6, h2, h4, h6 (impact code, type of investigation, investigation findings, and investigation conclusions).The device history record (dhr) review was completed and there were two non-conformances found related to this serial number.However, the valve was re-worked to completion, passing all inspections.Regurgitation is considered to be a perivalvular leak (pvl) if a turbulent eccentric jet originates between the bioprosthetic sewing ring and the annulus.Pvl can occur in the mitral and aortic position for similar reasons.In the early postoperative period, the highest incidence of pvl has been seen in patients developing infective endocarditis, which is most likely attributed to inadequate peri-operative antibiotic prophylaxis or nosocomial infection.Annular calcification is also a risk factor for the development of peri-operative pvl as the bioprosthesis may not seat properly after debridement.Technique related factors, such as incorrect valve sizing, have been shown to contribute to the development of pvl.Anatomical factors may create difficulty seating the bioprosthetic valve resulting in pvl.The anatomy of the annulus may induce mechanical stresses along the rigid bioprosthetic ring which can influence long-term valve performance and durability.A diseased or rigid annulus can potentially increase the mechanical stress on the prosthetic valve, leading to pvl.The instructions for use (ifu) have been reviewed and no inadequacies have been identified with regard to warnings, contraindications, and the directions/conditions for the successful use of the device.The reported type of event is included in the ifu.A definitive root cause cannot be conclusively determined; however, patient and/or procedural factors likely caused or contributed.

• Brand Name: EDWARDS INSPIRIS RESILIA AORTIC VALVE
• Type of Device: HEART-VALVE, NON-ALLOGRAFT TISSUE
• Manufacturer (Section D): EDWARDS LIFESCIENCES; 1 edwards way; irvine CA 92614
• Manufacturer (Section G): EDWARDS LIFESCIENCES; 1 edwards way; irvine CA 92614
• Manufacturer Contact: saurav singh ; 1 edwards way; mle fl2- office m2013; irvine, CA 92614 ; 9492506615
• MDR Report Key: 18905729
• MDR Text Key: 337684811
• Report Number: 2015691-2024-02007
• Device Sequence Number: 1
• Product Code: LWR
• UDI-Device Identifier: 00690103195019
• UDI-Public: (01)00690103195019(17)261116(11)221117
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: P150048
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 04/26/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/14/2024
• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Model Number: 11500A
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 04/26/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 11/17/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Hospitalization; Life Threatening; Required Intervention
• Patient Age: 78 YR
• Patient Sex: Male