Catalog Number D134701 |
Device Problem
Communication or Transmission Problem (2896)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Type
malfunction
|
Manufacturer Narrative
|
On 14-mar-2024, the bwi product analysis lab received the complaint device for evaluation.The product analysis has begun but is not completed at this time.When the investigational analysis has been completed, a supplemental 3500a report will be submitted.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by biosense webster inc., or its employees that the report constitutes an admission that the product, biosense webster inc., or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.E1.Initial reporter phone: (b)(6) if additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's ref.(b)(4).
|
|
Event Description
|
It was reported that a patient underwent a cardiac ablation procedure with a thermocool® smart touch® sf uni-directional navigation catheter and there was a lot of noise on all ecg signals was encountered.It was reported there was a lot noise signal on ablation catheter, both on carto system and recording system.On 26-feb-2024, additional information was received which confirmed the noise was on all ecg (bs + ic) channels on both the carto system and the recording system while the catheter was in the patient and the physician did not have any other intact ecg signals available to monitor the patient¿s heart rhythm.
|
|
Manufacturer Narrative
|
It was reported that a patient underwent a cardiac ablation procedure with a thermocool® smart touch® sf uni-directional navigation catheter and there was a lot of noise on all ecg signals was encountered.It was reported there was a lot noise signal on ablation catheter, both on carto system and recording system.On 26-feb-2024, additional information was received which confirmed the noise was on all ecg (bs + ic) channels on both the carto system and the recording system while the catheter was in the patient and the physician did not have any other intact ecg signals available to monitor the patient¿s heart rhythm.Device evaluation details: the device was returned to biosense webster inc (bwi) for evaluation and the evaluation has been completed.Visual inspection and electrical test of the returned device were performed following bwi procedures.Visual analysis revealed no damage or anomalies on the device.An electrical test was performed, and no electrical issues were found.A manufacturing record evaluation was performed for the finished device batch number, and no internal actions were identified.The electrical issue reported by the customer could not be replicated during the product investigation; other issues or circumstances may have occurred during the usage of the device that compromised its performance.The instructions for use contain the following recommendation: ecg noise is typically generated as the result of the improper connection of the body surface ecg patch to the patient.This noise is the most significant during ablation.To resolve this situation, verify the proper connection.It is recommended to turn off the notch filter for this verification.As part of biosense webster¿s quality process, all devices are manufactured, inspected, and released to approved specifications.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's ref.# (b)(4).
|
|
Search Alerts/Recalls
|
|