Catalog Number ENC452800 |
Device Problem
Premature Activation (1484)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/03/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
Manufacturer¿s ref.No: (b)(4).Information regarding patient identifier, date of birth, age, gender, weight, race, and ethnicity were not provided.Section e.1: the initial reporter phone: (b)(6).The initial reporter email address was not available / reported.Section h.3: the device is available to be returned for evaluation and testing.However, it has not been received to date as indicated as ¿other¿ in this section as the reason for non-evaluation.If the device returns, a device investigation will be performed.Lake region medical performed a review of the device history records relative to the manufacturing, inspection, and packaging of the lot 8512171.The history record indicates this product was final inspection tested at lake region medical and was determined to be acceptable.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by cerenovus, or its employees that the report constitutes an admission that the product, cerenovus, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Missing information from this report is identified as blank; this information was not provided in the reported event or available at the time of report submission.The manufacturer will submit a supplemental report if new facts arise which materially alter information submitted in a previous mdr report.Additional information will be submitted within 30 days of receipt.
|
|
Event Description
|
The healthcare professional reported that during the preparation for an endovascular embolization procedure, the physician opened the device packaging for the 4.5mm x 28mm no distal tip enterprise® vascular reconstruction device (vrd) (enc452800 / 8512171) and removed the device from the dispenser hoop, it was observed that the stent component was already released; the stent component was prematurely separated from the delivery wire.The device was not used in the patient.The physician replaced it with another device to complete the procedure.There was no negative patient impact.On 07-mar-2024, additional information was received.Per the information, the stent / stent delivery system did not appear damaged when it was removed.The replacement stent was another 4.5mm x 28mm no distal tip enterprise® vascular reconstruction device (enc452800).There was no delay in the procedure as a result of the reported issue.
|
|
Manufacturer Narrative
|
Manufacturer¿s ref.No: (b)(4).The purpose of this mdr submission is to report the investigational finding of the returned device.The complaint product was returned and received for evaluation and analysis.The investigation is documented below.Investigation summary: a non-sterile 4.5mm x 28mm no distal tip enterprise® vascular reconstruction device was received contained in the decontamination pouch.Visual inspection was performed.The stent component was observed still attached to the delivery wire and inside the introducer.No appearance of damages were observed.The stent length was measured and confirmed to be within specifications.The introducer was observed to be saturated with residues of dried blood.The reported issue documented in the complaint regarding the premature deployment of the stent during removal from the hoop was not confirmed since the stent was found still attached to the delivery wire.There is no indication that the issues reported in the complaint result from a defect inherently related to the enterprise device.Lake region medical performed a review of the device history records relative to the manufacturing, inspection, and packaging of the lot 8512171.The history record indicates this product was final inspection tested at lake region medical and was determined to be acceptable.As part of the cerenovus quality process, all devices are manufactured, inspected, and released to approved specifications.It should be noted that multiple factors could cause product failure.The instructions for use (ifu) does contain the following recommendations: carefully place the dispenser hoop into the sterile field.Remove the delivery wire from the clip on the dispenser hoop.Grasp the proximal end of the introducer and the delivery wire at the point where it exits the introducer.Hold wire and introducer together to prevent stent movement.Remove the cerenovus enterprise vascular reconstruction device and delivery system from the dispenser hoop.Do not partially deploy the stent from the introducer.Confirm that the delivery wire does not move relative to the introducer during the removal of the cerenovus enterprise vascular reconstruction device and delivery system from the dispenser hoop.Confirm the tip of the delivery wire is entirely within the introducer.Based on the manufacturing documentation review, there is no indication that the event is related to the device manufacturing process.As part of the post market surveillance program, information from this complaint is trended for statistical signals and corrective / preventive action may be triggered at a later time.Since there was no evidence to suggest the event was related to a manufacturing or design issue, no corrective actions will be taken at this time.Updated sections: b.4, g.3, g.6.H.2, h.3, h.6, and h.10.The manufacturer will submit a supplemental report if new facts arise which materially alter information submitted in a previous mdr report.Additional information will be submitted within 30 days of receipt.
|
|
Manufacturer Narrative
|
Manufacturer¿s ref.No: (b)(4).The purpose of this mdr submission is to report that the product analysis lab received the complaint device on 10-apr-2024.A supplemental 3500a report will be submitted once the product investigation has been completed.The manufacturer will submit a supplemental report if new facts arise which materially alter information submitted in a previous mdr report.Additional information will be submitted within 30 days of receipt.
|
|
Search Alerts/Recalls
|
|