MAUDE Adverse Event Report: SYNTHES GMBH DEPTH GAUGE FOR 3.5MM CORTEX SCREWS; GAUGE, DEPTH

Catalog Number 319.091

Device Problems Break (1069); Incorrect Measurement (1383); Material Deformation (2976)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/07/2024

Event Type  malfunction  

Manufacturer Narrative

Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.D9: complainant part is expected to be returned for manufacturer review/investigation, but has yet to be received.H3, h6: the investigation could not be completed; no conclusion could be drawn, as no product was received.Based on the information available, it has been determined that no corrective and/or preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

Event Description

Device report from canada reports an event as follows: it was reported that on (b)(6) 2024, the tips of the depth gauges were found to be bent and/or broken at the shaft.The products were unable to give accurate length readings.The procedure was completed successfully with a surgical delay of 2 minutes by using replacement depth gauges.No fragments were generated, no additional medical intervention was required.There was no adverse patient impact.No further information is available.This report is for a depth gauge for 3.5mm cortex screws.This is report 3 of 3 for (b)(4).

• Brand Name: DEPTH GAUGE FOR 3.5MM CORTEX SCREWS
• Type of Device: GAUGE, DEPTH
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: kate karberg ; 1302 wright lane east; west chester, PA 19380 ; 3035526892
• MDR Report Key: 18960571
• MDR Text Key: 338614049
• Report Number: 8030965-2024-04006
• Device Sequence Number: 1
• Product Code: HTJ
• UDI-Device Identifier: 10886982190000
• UDI-Public: (01)10886982190000
• Combination Product (y/n): N
• Reporter Country Code: CA
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 03/22/2024
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 319.091
• Device Lot Number: 5725690
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Date Manufacturer Received: 03/08/2024
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 02/29/2008
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1
• Treatment: DEPTH GAUGE F/SCR Ø1.3+1.5 SST; DEPTH GAUGE F/SCR Ø2+2.4 MEAS-RANGE UP-T