|
Catalog Number 2013-10M |
Device Problems
Inflation Problem (1310); Leak/Splash (1354)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/09/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
It was reported that the stopcock of the device was unable to be closed.However, after the product was received and inspection on 26 march 2024, it was found that the device leaked at the stopcock joint which prevented the balloon from properly staying inflated.We are unable to determine if the issue was due to a manufacturing error or resulting from improper handling of the device.It is possible the balloon was deformed as a result of over-inflation or inflating the balloon too rapidly.As the ifu states: slowly inflate the blue common carotid artery balloon with up to 1.5 ml of sterile saline.Do not inflate the internal carotid balloon to any greater volume than is necessary to obstruct blood flow for the internal carotid artery.We have conducted a lot history review and did not find any issues noted in the manufacturing or packaging process that could be related to this issue.All qc tests passed their requirements.
|
|
Event Description
|
Based on the initial information, it was reported that the stopcock of the device was unable to be closed.However, after the product was received and inspection on (b)(6) 2024, it was found that the device leaked at the stopcock joint which prevented the balloon from properly staying inflated.As a result, this incident was reassessed to be a reportable event.
|
|
Manufacturer Narrative
|
It was reported that the stopcock of the device was unable to be closed.However, after the product was received and inspected, it was found that the device leaked at the stopcock joint which prevented the balloon from properly staying inflated.Previous investigation into this issue has confirmed the root cause of the malfunction to be a manufacturing operator error, not enough glue was applied on the stopcock joint during the assembly process.Due to reports of similar issues, the product design is being reviewed through dhf0155 to address this issue.The lot history record for the product was reviewed, no issues were found during manufacturing or packaging that would cause or contribute to the reported event.We have not received any similar complaints related to this lot number.
|
|
Event Description
|
Based on the initial information, it was reported that the stopcock of the device was unable to be closed.However, after the product was received and inspection on 26 march 2024, it was found that the device leaked at the stopcock joint which prevented the balloon from properly staying inflated.As a result, this incident was reassessed to be a reportable event.Note: sending follow up due to incorrect information was accidentally entered in section h11.The write up contained data from another claim.
|
|
Search Alerts/Recalls
|
|
|