• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: NORMED MEDIZIN-TECHNIK GMBH EASY EXPLANT BIT SLOT-PIN 25 -3.5 MM

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

NORMED MEDIZIN-TECHNIK GMBH EASY EXPLANT BIT SLOT-PIN 25 -3.5 MM Back to Search Results
Catalog Number 507005001
Device Problem Device Markings/Labelling Problem (2911)
Patient Problem No Patient Involvement (2645)
Event Date 07/15/2015
Event Type  Other  
Event Description
It is reported that at hospital, upon receipt of original packed instrument, it was detected that the laser marking of the device is illegible.
 
Manufacturer Narrative
The manufacturer did not receive devices for review.A cause for this specific event cannot be ascertained from the information provided.Should additional information become available and an investigation result be available, that changes this assessment, an amended medical device report will be submitted.Zimmer's reference number of this file is (b)(4).
 
Manufacturer Narrative
Trend analysis: a trend was identified.A trend investigation has been initiated.Review of incoming information: laser marking is not readable on every device.No pictures were available.Devices analysis: all devices have a laser marking on the shaft.Item and lot number is marked on the shaft.On the top/head of the bit, the size and the system of the bit is marked.The surface of the device on the top/head is rough.Therefore, the laser marking was not ideally placed on the top/head.Possible causes for the reported event according to dfmea: laser marking not legible on the top/head of the device due to inadequate design for intended handling performance.Possible as the performed investigation showed that the surface of the device on the top/head was rough.Therefore, the laser marking was not ideally placed on the top/head.Based on the given information and the results of the investigation, we could identify a root cause for this issue.The surface of the device on the top/head is rough.Therefore, the laser marking was not ideally placed on the top/head.A capa was initiated to eliminate the root cause.(b)(4).
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
EASY EXPLANT BIT SLOT-PIN 25 -3.5 MM
Type of Device
EASY EXPLANT BIT
Manufacturer (Section D)
NORMED MEDIZIN-TECHNIK GMBH
ulrichstrasse 7
tuttlingen 78532
GM  78532
Manufacturer Contact
kevin escapule
p.o. box 708
warsaw, IN 46581-0708
5742676
MDR Report Key4959888
MDR Text Key17206958
Report Number9613350-2015-00878
Device Sequence Number1
Product Code HTW
Combination Product (y/n)N
Reporter Country CodeGM
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,foreign,health professi
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 07/15/2015
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received07/29/2015
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue Number507005001
Device Lot Number15921
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer10/05/2015
Is the Reporter a Health Professional? No
Date Manufacturer Received10/09/2015
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured04/01/2015
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Patient Sequence Number1
Patient Outcome(s) Other;
-
-