SORIN GROUP USA, INC. VENTR CATH PVC 2 POS LST 18 FR; CATHETER, CANNULA AND TUBING, VASCULAR, CARDIOPULMONARY BYPASS
|
Back to Search Results |
|
Catalog Number VT-53218 |
Device Problems
Difficult to Remove (1528); Other (for use when an appropriate device code cannot be identified) (2203)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Type
Other
|
Manufacturer Narrative
|
No specific event date was reported.Add'l device mfg dates: 02/02/2015 & 02/16/2015.Sorin group received a report that the stylet was very difficult to extract.No specific event date(s) were reported.The customer provided three lot number in this one report: 1502900021; exp.Date.01/31/2015 & 1504300034 exp date 02/28/2018.However, no specific details were provided regarding these lots.No unit has been retained for investigation.There was no report of patient injury.
|
|
Event Description
|
Sorin group received a report that the stylet was very difficult to extract.No specific event date was reported.The customer provided three lot numbers in this one report.However, no specific details were provided regarding these lots.No unit has been retained for investigation.There was no report of patient injury.
|
|
Manufacturer Narrative
|
Sorin group received a report that the stylet was difficult to extract.There was no report of patient injury.No product was returned for evaluation.Sorin group initiated a capa in response to this issue.Evaluation of units from inventory was able to reproduce the issue of difficulty removing the stylet when tested under dry conditions but once flushed, the stylet could be removed with no difficulty.The sorin vent catheter instructions for use instruct the user to "remove the stylet from the catheter and flush the catheter" prior to use.The capa investigation led to the conclusion that the issue was caused by a problem with the surface finish on the stylet.A review of the tubing specification revealed that the surface finish description was not specific enough to ensure the functional requirements were met.Therefore the specification was updated to call out the specific surface finish standard required and this update was communicated to the supplier of the tubing to ensure proper implementation.No further actions are deemed necessary at this time.
|
|
Search Alerts/Recalls
|
|
|