SYNTHES MONUMENT 7MM TI STRAIGHT RADIAL STEM 26MM-STERILE; PROSTHESIS, ELBOW, HEMI-RADIAL, POLYMER
|
Back to Search Results |
|
Catalog Number 04.402.007S |
Device Problem
Loose or Intermittent Connection (1371)
|
Patient Problems
Pain (1994); Non-union Bone Fracture (2369)
|
Event Type
Injury
|
Manufacturer Narrative
|
(b)(6).(b)(4).Product investigation summary: the complaint condition for the radial head (part 09.402.020 / lot 7693233) and radial stem (part 04.402.007 / lot 7683416) was likely caused by an incorrectly sized implant or patient noncompliance; however, this complaint is not likely a result of any design related deficiency.The radial head and radial stem are implants routinely used in the radial head prosthesis system.The devices were returned and reported to have caused patient pain and to have loosened.This condition is unconfirmed; the implant was removed from the patient, but confirming loosening of the implant would require x-rays, which were not provided.It is likely that an incorrectly sized implant or patient noncompliance has led to this complaint condition.The radial head was manufactured in october, 2014 and is over a year old.The radial stem was manufactured in november, 2014 and is a year old.The balance of the returned devices is in fairly worn condition consistent with implantation and removal.The relevant drawings were reviewed and determined to be suitable for the intended design, application, and dimensional conformity when used as recommended.The condition of the returned device does not agree with the complaint description.Whether the complaint condition for this device can be replicated is not applicable for this condition.No design related issues were found that would contribute to this complaint condition.Device history record review: manufacturing location: (b)(4).Manufacturing date: november 19, 2014 - expiration date: october 31, 2019 no non-conformance reports were generated during production.Review of the device history record(s) showed that there were no issues during the manufacture of the product that would contribute to this complaint condition.Sterility documentation was also reviewed and determined to be conforming.Device used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported that a left elbow radial head prosthesis revision procedure was performed on (b)(6) 2015 following patient complaints of pain in the left wrist and elbow.The prosthesis was noted to have loosened and toggled in the broached area.No bony growth was observed.Additionally, there was noted shortening of the left forearm.During the original surgical procedure, the radial head and stem were implanted along with a cable.During the revision, the radial head and stem were removed, but the cable remained implanted.The patient was revised to a non-synthes, cemented radial head prosthesis.Intraoperative x-rays were taken and the procedure was completed successfully without delay.Upon review of the devices, the surgeon expressed that the synthes implant did not look porous enough to promote bony growth.(b)(4).
|
|
Search Alerts/Recalls
|
|
|