MAUDE Adverse Event Report: ANGIODYNAMICS NAMIC; STOPCOCK

Catalog Number H965700550091

Device Problem Hole In Material (1293)

Patient Problem No Known Impact Or Consequence To Patient (2692)

Event Date 11/16/2015

Event Type  malfunction  

Manufacturer Narrative

A review of the device history records was performed for the reported packaging lot for any deviations related to the reported defect of the complaint.The review confirms that the lot met all material, assembly and performance specifications.The angiodynamics october 2015 complaint report was reviewed for the product family of stopcocks/manifolds and the failure mode, "hole in pouch." no adverse trends were identified.The returned sample was visually inspected and the hole in the pouch was confirmed.As part of the receiving process at (b)(4) (the distributor in (b)(4)), all pouched products are removed from their inner boxes and a (b)(4) label (in (b)(4) ) is applied to each pouch.Additional handling may occur if the pouches are 100% visually inspected.The pouched product is then re-boxed into the inner box by the (b)(4) warehouse employees.The hole in the tyvek was likely caused by the handle of the stopcock, however, what caused the handle to be pushed against the tyvek in a manner that resulted in a hole cannot be determined.Potential contributing factors include: handling in the in-process bins after sealing but prior to being sent to the final box area or handling of the pouches as they are placed in the inner boxes at angiodynamics.Handling during transit to the (b)(4) warehouse.Handling at (b)(4) during the labeling/inspection and re-boxing process.All pouches are 100% inspected per angiodynamics procedures during the sealing and final box processes.The directions for use (dfu) for the stopcocks contain the following warning: "contents supplied sterile using an ethylene oxide (eo) process.Do not use if sterile barrier is damaged.(b)(4).

Event Description

As reported by angodynamic's distributor in (b)(4), in the distributor's warehouse a small hole was found in the tyvek portion of the stopcock pouch, breaching the sterility.The device had not been provided to a hospital and was returned to angiodynamics for evaluation.

• Brand Name: NAMIC
• Type of Device: STOPCOCK
• Manufacturer (Section D): ANGIODYNAMICS; glens falls NY
• Manufacturer (Section G): ANGIODYNAMICS; 10 glens falls technical park; glens falls NY 12801
• Manufacturer Contact: law ryan ; 10 glens falls technical park; glens falls, NY 12801 ; 5187424488
• MDR Report Key: 5301853
• MDR Text Key: 33719740
• Report Number: 1317056-2015-00208
• Device Sequence Number: 1
• Product Code: DTL
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: K842829
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: distributor,foreign
• Reporter Occupation: Not Applicable
• Type of Report: Initial
• Report Date: 11/17/2015

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/07/2015
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Other
• Device Expiration Date: 09/30/2018
• Device Catalogue Number: H965700550091
• Device Lot Number: 4931562
• Was Device Available for Evaluation?: Yes
• Date Returned to Manufacturer: 11/24/2015
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 11/17/2015
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 09/01/2015
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1