(b)(4).The actual device involved in the reported incident was not returned for evaluation.The event description indicated that the lor glass syringe did not slide smoothly despite lubrication with saline solution, which altered sensation during lor technique, resulting in an inadvertent dural puncture and leakage of csf.However, without the actual sample, a thorough evaluation could not be performed and no specific conclusions can be drawn.Review of the discrepancy management system database performed for the reported lot number did not reveal any abnormalities or nonconformances of this nature.No adverse quality trends of this nature were identified during the complaint review process for the reported catalog number or involved lor syringe material number.There were no other reports of this nature against the reported lot number.If additional pertinent information becomes available or if the physical sample is received for evaluation, a follow-up report will be filed.
|
As reported by the user facility: reports while doing a routine combined spinal, the glass loss-of-resistance (lor) syringe did not glide smoothly despite being lubricated throughout the barrel with the saline solution supplied in the kit.This resulted in altered sensation during the lor technique, and an inadvertent dural puncture and leakage of csf.A catheter was placed subdurally to leave in for 24 hours to decrease risk of post-puncture headache (pdph).The patient began to complain of paresthesia on the right, so the catheter and needle were removed completely.
|
Per follow-up correspondence with the reporting facility, there were two separate incidents that occurred on the same day with two separate patients (incident # 1 is filed under report # 2523676-2015-00625; incident # 2 is filed under report # 2523676-2015-00697).No samples are available for either occurrence.All available information regarding this occurrence was forwarded to the device manufacturer of the lor glass syringe.The manufacturer performed testing on their retention samples of the involved syringe lots.No issues were found during this testing.All plungers moved freely in and out of the barrels.The manufacturer also indicated that the syringe barrels are siliconized to ensure a smooth plunger flow action, which is designed around a dry prep.If used as a wet prep, as was indicated by the reporting facility, the silicone and saline may create binding.If the syringe sits for an unusual period of time in the wet prep (saline or other solutions), the possibility of binding increases.The saline technique is not recommended with siliconized syringes.Per the instructions for use (ifu) for the saline solution that is provided in b.Braun catalog # 332079, the saline solution is intended to be "used to flush intravascular catheters or as a sterile, isotonic single dose vehicle, solvent, or diluent for substances to be administered intravenously, intramuscularly or sub-cutaneously." if additional pertinent information becomes available, a follow-up report will be filed.
|