MAUDE Adverse Event Report: OSCOR INC. MEDTRONIC REUSABLE EXTENSION CABLE; ELECTRODE CABLE

Model Number 53912

Device Problem Pacing Problem (1439)

Patient Problem No Known Impact Or Consequence To Patient (2692)

Event Date 05/02/2016

Event Type  malfunction  

Manufacturer Narrative

The device was in use for treatment.The device was not returned for evaluation; as a result, the allegations against this cable (no output) cannot be confirmed.A review of the device history records could not be performed as the lot number of the device is unknown.As the device was not returned for analysis, the root cause of the failure could not be determined.Potential cause of this failure: insufficient strength of soldered joint.Since the separation between the cable wire and the soldered pin may cause a disruption of the cable function, a corrective and preventive action has been opened to address this failure.Per the cable inspection procedure, during in process inspection the cable is inspected 100% for continuity.During final inspection, each strand of the cable is checked for the correct colored part, overall length of the cable, cable checked for damage and insulation voids, verification that the silicone strain relief extends at least for a length of 2 cm outside the female connector, checked that the silicone strain relief fits the wire snugly, checks for strain relieves for damage and gaps, a pull test is done on each connector and pin and the cable is inspected again for continuity.The instructions for use (ifu) informs the user: for reusable cables only: the cables can be re-sterilized by oscor eto gas sterilization a maximum of two times.The directions for use inform the user to: first attach the proximal connector(s) to a pacemaker/analyzer or another extension cable while observing polarity indicated by the color.Then attach the distal connector(s) to the temporary lead connector or to another extension cable, again observing polarity by the color.The detachment of the connection should be done in the reverse order.Precautions include: do not connect any cable model to a/c power source; connection of exposed pins to a/c power source may pose a risk of serious injury or death.Extension cables are not intended for use with apnea monitors.

Event Description

The customer reported the external pacer 5391 was not firing.Biomed tested on qed and was able to measure an output, however when using the adapter cable 53912 there was no output.

• Brand Name: MEDTRONIC REUSABLE EXTENSION CABLE
• Type of Device: ELECTRODE CABLE
• Manufacturer (Section D): OSCOR INC.; 3816 desoto blvd.; palm harbor FL 34683 1618
• Manufacturer (Section G): OSCOR INC.; 3816 desoto blvd.; palm harbor FL 34683 1618
• Manufacturer Contact: dorit segal ; 3816 desoto blvd.; palm harbor, FL 34683-1618 ; 7279372511
• MDR Report Key: 5837911
• MDR Text Key: 50915133
• Report Number: 1035166-2016-00139
• Device Sequence Number: 1
• Product Code: IKD
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K070926
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: distributor,health profession
• Reporter Occupation: Other
• Type of Report: Initial
• Report Date: 07/05/2016

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 08/01/2016
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Physician
• Device Model Number: 53912
• Device Catalogue Number: 53912
• Is the Reporter a Health Professional?: No
• Date Manufacturer Received: 07/05/2016
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1