• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MAQUET CV HS III PROXIMAL SEAL SYTEM 3.8MM; CLAMP, VASCULAR

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MAQUET CV HS III PROXIMAL SEAL SYTEM 3.8MM; CLAMP, VASCULAR Back to Search Results
Catalog Number C-HSK-3038
Device Problem Malposition of Device (2616)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Date 09/12/2016
Event Type  malfunction  
Manufacturer Narrative
(b)(4).A lot history record review was completed for the reported product lot number.There was no nonconformance recorded in the lot history.The device has been returned to the factory and is being evaluated.A supplemental report will be submitted when the evaluation is completed.
 
Event Description
The hospital reported that during a coronary artery bypass procedure, hs iii proximal seal system 3.8mm seal was pushed.A replacement device was used to complete the procedure.The hospital did not report any patient effects.
 
Manufacturer Narrative
(b)(4).The device was returned to the factory for evaluation.Signs of clinical usage and no evidence of blood were observed.The delivery device was returned inside the loading device.The delivery device was removed from the loading device, the tension spring assembly and the seal remained in the delivery tube.The seal was completely wrapped/fold indicating successful loading of the seal in the delivery device.The blue slide lock was engaged and the plunger was not depressed.The following measurements of the delivery tube were taken: the inner delivery tube diameter was measured at.197 inches , the outer diameter was measured at.217 inches.The length of the delivery tube was measured at 2.52 inches.The values recorded were within the tolerance specifications.Based upon the received condition of the device, the reported complaint was not confirmed for the reported failure mode "failure to properly load".
 
Event Description
The hospital reported that during a coronary artery bypass procedure, hs iii proximal seal system 3.8mm seal was pushed.A replacement device was used to complete the procedure.The hospital did not report any patient effects.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
HS III PROXIMAL SEAL SYTEM 3.8MM
Type of Device
CLAMP, VASCULAR
Manufacturer (Section D)
MAQUET CV
45 barbour pond drive
wayne NJ 07470
Manufacturer (Section G)
MAQUET CV
45 barbour pond drive
wayne NJ 07470
Manufacturer Contact
45 barbour pond drive
wayne, NJ 07470
MDR Report Key6035164
MDR Text Key57815428
Report Number2242352-2016-01010
Device Sequence Number1
Product Code DXC
Combination Product (y/n)N
PMA/PMN Number
K080169
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 09/20/2016
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received10/17/2016
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date05/02/2017
Device Catalogue NumberC-HSK-3038
Device Lot Number25124822
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer09/26/2016
Is the Reporter a Health Professional? No
Device AgeYR
Date Manufacturer Received11/16/2016
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured05/02/2016
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage N
Patient Sequence Number1
Patient Age51 YR
-
-