Catalog Number 606S255X |
Device Problems
Obstruction of Flow (2423); Physical Resistance (2578)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 10/27/2016 |
Event Type
malfunction
|
Manufacturer Narrative
|
This is one of two initial mdr report being submitted for this complaint with associated mfr# 3008264254-2016-00082 and 1226348-2016-00169.(b)(4).The product will not be returned for analysis however a device history record review is currently being conducted and the results are not yet available.No conclusion is made at this time.
|
|
Event Description
|
As reported by a health care professional, resistance was experienced during a procedure when using a prowler select plus (606s255x/17415721) catheter.The procedure was coil embolization of an aneurysm at the internal carotid artery.The patient was male but his age was unknown.The patient's vessels were moderately torturous and not calcified.The prowler select plus (complaint product) was selected for using an enterprise 23mm (lot unknown) during the procedure.The catheter was approached to the middle cerebral artery from the internal carotid artery.However there was resistance felt at the proximal portion when the enterprise was delivered.The catheter was replaced with another one.The procedure was successfully completed without further issues or delay.There were no patient injuries or complications reported.The complaint product was new and stored per labeling instructions.The procedure was conducted in accordance with the ifu and a constant flush was maintained at all time.No visible defect/damage was noted on the products prior to and after the event.The product is not available for investigation.No further information is available.
|
|
Manufacturer Narrative
|
This is one of two final mdr report being submitted for this complaint with associated mfr# 3008264254-2016-00082 and 1226348-2016-00169.Based on the information, the reported event of obstruction of the catheter could not be confirmed.The product was not returned for analysis; however a review of the manufacturing documentation associated with this lot presented no issues during the manufacturing or inspection process that can be related to the reported complaint.Therefore, no corrective actions will be taken at this time.
|
|
Search Alerts/Recalls
|