MAUDE Adverse Event Report: COOK ENDOSCOPY FUSION QUATTRO EXTRACTION BALLOON; GCA, CATHETER, BILIARY, SURGICAL

Catalog Number FS-QEB-A

Device Problem Material Protrusion/Extrusion (2979)

Patient Problem No Consequences Or Impact To Patient (2199)

Event Date 10/10/2016

Event Type  malfunction  

Manufacturer Narrative

Concomitant medical products: cook fusion® pre-loaded with acrobat wire guide sphincterotome (fs-omni-acro-35-260).Investigation evaluation: our laboratory evaluation of the product said to be involved determined that the ide port was damaged.The ide port was stretched outward and the skived area was twisted.The ide port on the distal end is stretched outward more than 1 mm.The damage to the ide port is on both the proximal and distal end.Excessive force beyond normal use would be required to cause this tpe of damage to the device.The distal end of the ide port was found to be within specification.The balloon was tested using a syringe from our stock.The balloon was filled with air and submerged in water.There were no air bubbles detected while the balloon was submerged in water.A functional verification was performed using the device to simulate an exchange via the ide port.The balloon was advanced through a duodenoscope that was placed in a simulated biliary position.The duodenoscope has an accessory channel that is 4.2 mm in diameter.Using a.035" acrobat wire guide, a wire-guide exchange was simulated.During the exchange the wire guide remained in the simulated biliary duct and access was maintained.A product-specific discrepancy that could have caused or contributed to this observation was not observed during our laboratory analysis.The device history record for the lot number said to be involved was reviewed.A discrepancy or anomaly was not observed with the product that was released for distribution.Investigation conclusions: a definitive cause for this observation could not be determined because the actual use conditions could not be duplicated in the laboratory setting.Due to a variety of clinical conditions such as patient anatomy, endoscope position or progression of disease state, we could not reproduce the actual conditions of product usage during our laboratory analysis.This limits our ability to conclusively determine a cause.The catheter exhibited damage (twisted, elongation and kinking of the ide port).The damage suggests excessive force was applied to the catheter.The damage to the ide port could contribute to difficulties during an exchange.The instructions for use states: "advance device in short increments until it is endoscopically visualized exiting endoscope." this activity will aid in device preservation.If the elevator of the endoscope is placed in the closed position with the extraction balloon catheter inside the accessory channel, this can contribute to damage to the catheter.Prior to distribution, all fusion quattro extraction balloons are subjected to a visual inspection and functional testing to ensure device integrity.A review of the device history record confirmed that the lot said to be involved met all manufacturing requirements prior to shipment.Corrective action: a review of the complaint history was conducted.The likelihood of occurrence is considered rare.Corrective action is not warranted at this time based on the quality engineering risk assessment.Quality assurance will continue to monitor for complaint trends and reassess the risk assessment results as post market feedback continues to become available.

Event Description

During an endoscopic retrograde cholangiopancreatography (ercp), the physician used a cook fusion quattro extraction balloon.When the fusion quattro extraction balloon was taken out of the package, it worked fine.They were inside the duct doing a balloon sweep when difficulty was experienced in removing the balloon.The cook fusion preloaded with acrobat wire guide wanted to come out with it (see related mdr report number 1037905-2016-00441).When the cook fusion quattro extraction balloon was received for evaluation on 11/04/2016, the intraductal exchange (ide) port was noted to be damaged.

• Brand Name: FUSION QUATTRO EXTRACTION BALLOON
• Type of Device: GCA, CATHETER, BILIARY, SURGICAL
• Manufacturer (Section D): COOK ENDOSCOPY; 4900 bethania station rd; winston-salem NC 27105
• Manufacturer Contact: scottie fariole ; 4900 bethania station rd; winston-salem, NC 27105 ; 3367440157
• MDR Report Key: 6131571
• MDR Text Key: 61098787
• Report Number: 1037905-2016-00482
• Device Sequence Number: 1
• Product Code: GCA
• UDI-Device Identifier: 00827002482258
• UDI-Public: (01)00827002482258(17)170725(10)W3746421
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K063677
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,health
• Reporter Occupation: Other
• Type of Report: Initial
• Report Date: 11/29/2016

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 11/29/2016
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: FS-QEB-A
• Was Device Available for Evaluation?: Yes
• Is the Reporter a Health Professional?: No
• Was the Report Sent to FDA?: No
• Distributor Facility Aware Date: 10/10/2016
• Device Age: 3 MO
• Event Location: Hospital
• Date Manufacturer Received: 11/04/2016
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 07/25/2016
• Is the Device Single Use?: Yes
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: OLYMPUS 180-V ERCP ENDOSCOPE