• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER ORTHOPAEDICS-MAHWAH MAKO X3 UNI ONLAY TIBIAL INSERT SIZE 5 - 8 MM; PROSTHESIS, KNEE PATELLOFEMOROTIBIAL, PARTIAL, SEMI-CONSTRAINED, CEMENTED, POLYM

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER ORTHOPAEDICS-MAHWAH MAKO X3 UNI ONLAY TIBIAL INSERT SIZE 5 - 8 MM; PROSTHESIS, KNEE PATELLOFEMOROTIBIAL, PARTIAL, SEMI-CONSTRAINED, CEMENTED, POLYM Back to Search Results
Catalog Number 180735-1
Device Problems Mechanical Problem (1384); Device Damaged by Another Device (2915); Positioning Problem (3009)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Date 04/07/2017
Event Type  malfunction  
Manufacturer Narrative
Reported event: an event regarding alleged "seating/locking issue" involving a triathlon insert was reported.The event was confirmed.Method & results: -device evaluation and results: the device was returned in used condition.There were evidence of scratches where contact would have been made with the baseplate while attempting to seat the insert.Examination of the device by the material analysis engineer indicated "damage observed on the inserts consistent with contact against the baseplate." -medical records received and evaluation: not performed as no medical records were provided.-device history review: dhr review for the reported lot was satisfactory.-complaint history review: chr review for the reported lot confirmed that there are no other similar events reported.Conclusions: the investigation concluded that based on the returned device, there were evidence of scratches where contact would have been made with the baseplate while attempting to seat the insert.Examination of the device by the material analysis engineer indicated "damage observed on the inserts consistent with contact against the baseplate." no further investigation for this event is required at this time.
 
Event Description
The company representative reported that the surgeon had trouble implanting a mako partial knee.This was a primary surgery on the left knee.An update on (b)(6) 2017 reported that the surgeon had trouble getting the implant lined up correctly and couldn't get it to snap down in place.Neither of the inserts were implanted and a third poly was brought in from our office and was implanted.There was a surgical delay of approximately 35-40 minutes while we waited on a third poly to be delivered to the hospital from our office.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
MAKO X3 UNI ONLAY TIBIAL INSERT SIZE 5 - 8 MM
Type of Device
PROSTHESIS, KNEE PATELLOFEMOROTIBIAL, PARTIAL, SEMI-CONSTRAINED, CEMENTED, POLYM
Manufacturer (Section D)
STRYKER ORTHOPAEDICS-MAHWAH
325 corporate drive
mahwah NJ 07430
Manufacturer (Section G)
STRYKER ORTHOPAEDICS-MAHWAH
325 corporate drive
mahwah NJ 07430
Manufacturer Contact
brian lauro
325 corporate drive
mahwah, NJ 07430
2018315000
MDR Report Key6652451
MDR Text Key77927326
Report Number0002249697-2017-01930
Device Sequence Number1
Product Code NPJ
UDI-Device Identifier00848486016548
UDI-Public00848486016548
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K150307
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type health professional,other
Reporter Occupation Physician
Type of Report Initial
Report Date 06/19/2017
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received06/19/2017
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date01/12/2022
Device Catalogue Number180735-1
Device Lot Number3L72ET
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer04/17/2017
Is the Reporter a Health Professional? Yes
Date Manufacturer Received05/22/2017
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured01/12/2017
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Other;
-
-