• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARD® CRITICORE® MONITOR; CRITICORE MONITOR

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

C.R. BARD, INC. (COVINGTON) -1018233 BARD® CRITICORE® MONITOR; CRITICORE MONITOR Back to Search Results
Model Number 000002N
Device Problems Device Displays Incorrect Message (2591); Improper Device Output (2953); Temperature Problem (3022)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Type  malfunction  
Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.The information provided by bard represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bard.
 
Event Description
It was reported that the device received a check container/container not level alarm.The temperature on the device also varied from 80 to 109 and the temperature jack was not soldered in properly.The biomed stated he took it out and installed a new one.The present interval output jumps 300% for no reason.
 
Manufacturer Narrative
The reported issue of the device giving a check container/container not level alarm was confirmed.The temperature on the device also varied from 80 to 109 and the temperature jack was not soldered in properly.The device was returned to bes/dymax for evaluation.The biomed stated he took it out and installed a new one.The root cause of the reported issue was design control issues related to software versions (b)(4).The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use state the following: ¿warning: the criticore®monitor requires special precautions regarding emc and needs to be installed and put into service according to the emc information provided in the tables, emc compliance.Portable and mobile rf communications equipment may affect the criticore® monitor.The criticore®monitor may be interfered with by other equipment, even if that other equipment complies with cispr emission requirements.Warning: the criticore® monitor should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the criticore® monitor should be observed to verify normal operation in the configuration in which it will be used.Warning: do not immerse or submerge the monitor or turn it upside down when cleaning.Warning: during long-term storage, remove primary batteries.Warning: to avoid the risk of electric shock this equipment must only be connected to a supply mains with protective earth.Caution: do not set alarm limits to extreme values that can render the alarms useless.Caution: use only alkaline d cell batteries.Do not use rechargeable batteries.Do not incinerate batteries.Recycle or dispose of them properly.Contact bard for disposal information.Caution: improper orientation of the batteries within the battery pack can potentially damage the criticore® monitor.Caution: state and federal regulations govern the packaging necessary for return of medical product which may have been contaminated.Refer to local, state and federal regulations when packaging the criticore® monitor for return.Caution: there are no user serviceable components inside the criticore® monitor.The user should not attempt to repair the criticore® monitor.To do so, may void the warranty and could result in erroneous monitor readings.Maintenance for instructions on how to return the monitor to bard for service and/or calibration.Caution: use of cables or sensors other than those specified for use with the criticore® monitor, except those sold by bard for use as replacement part or repair components, may result in increased emissions or decreased immunity of the criticore® monitor.Caution: the criticore® monitor should be recycled properly per european union directive 2012/19/eu on waste electronic and electrical equipment, july 4, 2012.Do not dispose with ordinary municipal waste.Caution: there are no serviceable components in the criticore® monitor.The user and/or service personnel should not attempt repair of the criticore® monitor.To do so, may void the warranty, and could result in erroneous monitor readings.Note: it is recommended that the monitor receive a maintenance inspection annually, including replacing the lithium coin cell, or more frequently as dictated by hospital protocol.The inspection must be performed at an authorized c.R.Bard, inc.Service facility.To arrange for service from c.R.Bard, inc., call 1-800-526-4455.Note: always perform a functional checkout of the criticore® monitor prior to putting the monitor into service after repair." (b)(4).
 
Event Description
It was reported that the device received a check container/container not level alarm.The temperature on the device also varied from 80 to 109 and the temperature jack was not soldered in properly.The biomed stated he took it out and installed a new one.The present interval output jumped to 300% for no reason.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
BARD® CRITICORE® MONITOR
Type of Device
CRITICORE MONITOR
Manufacturer (Section D)
C.R. BARD, INC. (COVINGTON) -1018233
8195 industrial blvd
covington GA 30014
Manufacturer (Section G)
C.R. BARD, INC. (COVINGTON) -1018233
8195 industrial blvd
covington GA 30014
Manufacturer Contact
amy gravley
8195 industrial blvd
covington, GA 30014
7707846100
MDR Report Key6784651
MDR Text Key82592400
Report Number1018233-2017-04185
Device Sequence Number1
Product Code EXS
UDI-Device Identifier00801741080777
UDI-Public(01)00801741080777
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
EXEMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type other,user facility
Reporter Occupation Biomedical Engineer
Type of Report Initial,Followup
Report Date 11/22/2017
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received08/10/2017
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number000002N
Device Catalogue Number000002N
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer07/27/2017
Is the Reporter a Health Professional? Yes
Date Manufacturer Received11/20/2017
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured03/21/2017
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Reuse
Patient Sequence Number1
-
-