COVIDIEN MFG SOLUTIONS S.A. MAHURKAR; CATHETER, HEMODIALYSIS, TRIPLE LUMEN, NON-IMPLANTED
|
Back to Search Results |
|
Model Number 8888345629HP |
Device Problem
Kinked (1339)
|
Patient Problem
Death (1802)
|
Event Date 11/13/2017 |
Event Type
malfunction
|
Manufacturer Narrative
|
The incident sample has been requested but to date has not been received for evaluation.When the sample is received or if additional information pertinent to the incident is obtained a follow-up report will be submitted.If information is provided in the future, a supplemental report will be issued.
|
|
Event Description
|
According to the reporter, during catheter insertion the guide wire was being removed from the catheter and had resistance wherein an increased force had to be used to pull back the wire.When the wire was completely removed, it was found to be twisted.An x-ray revealed that the catheter was double kinked and that parts of the guide wire were visible inside the catheter.The catheter was then completely explanted, and a new catheter was implanted to resolve the issue.There was no injury to the patient from this event.It was reported 2 days later that the patient had died, however it was not related to the issue with the guide wire.The doctor stated the death was not caused by the device.He stated the cause was the sum of basic diseases of the patient, a high blood loss due to an operation performed, and the patient had been failing for weeks.
|
|
Manufacturer Narrative
|
Evaluation summary: a device history record (dhr) review was performed to the lot and no discrepancies that may have contributed to a complaint of this nature were found.Two pictures were provided by the customer.The first picture shows the guide wire.This image shows the guide wire with signs of use and shows that the guide wire was kinked and broken.In the second picture, the guide wire is stretched inside a plastic bag.One incomplete kit was also received for analysis and investigation.The sample consisted of one guide wire which was returned with components of different products.Visual inspection was performed, and revealed that the guide wire was stretched and kinked at different points.Dimensional testing was performed identifying no issues.The reported condition was confirmed from the analysis.Based on the available information the reported condition could not be attributed to the manufacturing process.The most probable root cause can be considered as damaged during use.It must be noted that in-process controls are in place to prevent no nconforming product from leaving the manufacturing operations.If information is provided in the future, a supplemental report will be issued.
|
|
Manufacturer Narrative
|
If information is provided in the future, a supplemental report will be issued.
|
|
Search Alerts/Recalls
|
|
|