|
Model Number B-50000 |
Device Problem
Free or Unrestricted Flow (2945)
|
Patient Problems
Nausea (1970); Pain (1994)
|
Event Date 11/21/2017 |
Event Type
malfunction
|
Manufacturer Narrative
|
The reporter of the event was asked to return the product for analysis.To date, apollo has not received the device.Device labeling addresses the reported event as follows: warnings and precautions: the physiological response of the patient to the presence of the orbera system balloon may vary depending upon the patient's general condition and the level and type of activity.The types and frequency of administration of drugs or diet supplements and the overall diet of the patient may also affect the response.Each patient must be monitored closely during the entire term of treatment in order to detect the development of possible complications.Each patient should be instructed regarding symptoms of deflation, gastrointestinal obstruction, ulceration and other complications which might occur, and should be advised to contact his/her physician immediately upon the onset of such.Complications: possible complications of the use of the orbera system include: - gastric discomfort, feelings of nausea and vomiting following balloon placement as the digestive system adjusts to the presence of the balloon.- continuing nausea and vomiting.This could result from direct irritation of the lining of the stomach or as a result of the balloon blocking the outlet of the stomach.It is even theoretically possible that the balloon could prevent vomiting (not nausea or retching) by blocking the inlet to the stomach from the esophagus.- abdominal or back pain, either steady or cyclic.
|
|
Event Description
|
Reported as: a patient with the orbera intragastric balloon had "complained of nausea and abdominal pain.Confirmed at the endoscopy that the balloon was hyperinflated.It was necessary to remove it to treat." doctor implanted another balloon.
|
|
Manufacturer Narrative
|
Supplement #1 - medwatch sent to fda on 15-feb-2018.Device evaluation summary: the device was returned for analysis, and a visual examination noted the balloon shell to be discolored, as it was dark blue in appearance.White and brown particles were noted on the outer surface of the balloon.A sample fill tube was used for device testing.A valve test was performed, and no blockage was noted.An air leak test was performed, and leakage was noted from three openings near the radius of the shell.Under microscopic analysis, the openings were noted to have striated edges, consistent with surgical damage and device removal activities.Blue particles were noted on the inner surface of the valve channel.
|
|
Search Alerts/Recalls
|
|
|