|
Model Number B-50000 |
Device Problem
Free or Unrestricted Flow (2945)
|
Patient Problems
Nausea (1970); Pain (1994); Vomiting (2144)
|
Event Date 11/20/2017 |
Event Type
malfunction
|
Manufacturer Narrative
|
The reporter of the event was asked to return the product for analysis.To date, apollo has not received the device.Device labeling addresses the reported event as follows: warnings and precautions: the physiological response of the patient to the presence of the orbera system balloon may vary depending upon the patient's general condition and the level and type of activity.The types and frequency of administration of drugs or diet supplements and the overall diet of the patient may also affect the response.Each patient must be monitored closely during the entire term of treatment in order to detect the development of possible complications.Each patient should be instructed regarding symptoms of deflation, gastrointestinal obstruction, ulceration and other complications which might occur, and should be advised to contact his/her physician immediately upon the onset of such.Complications: possible complications of the use of the orbera system include: gastric discomfort, feelings of nausea and vomiting following balloon placement as the digestive system adjusts to the presence of the balloon.Continuing nausea and vomiting.This could result from direct irritation of the lining of the stomach or as a result of the balloon blocking the outlet of the stomach.It is even theoretically possible that the balloon could prevent vomiting (not nausea or retching) by blocking the inlet to the stomach from the esophagus.Abdominal or back pain, either steady or cyclic.
|
|
Event Description
|
Reported as: a patient with the orbera intragastric balloon had "complained of vomiting / nausea and abdominal pain.Confirmed on ultrasonography that the balloon was hyperinflated.It was necessary to remove it for treatment and replace another balloon".
|
|
Manufacturer Narrative
|
Device evaluation summary: the device was returned for analysis, and visual examination noted the balloon shell to be discolored, as it was blue in appearance.White and blue particles were noted on the inner and outer surfaces of the balloon shell.A sample fill tube was used for device testing.A valve test was performed, and when di water was injected into the valve, the flow of fluid was continuous and unobstructed.An air leak test was performed, and leakage was noted from one opening on the posterior of the shell, approximately 3.1 inches away from the center patch.Under microscopic analysis, the opening was noted to have striated edges, consistent with surgical damage and device removal activities.No particles were noted in the valve channel.
|
|
Search Alerts/Recalls
|
|
|