• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: FREDERIC LELEU - MAQUET SAS LUCEA 40; DEVICE, MEDICAL EXAMINATION, AC POWERED

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

FREDERIC LELEU - MAQUET SAS LUCEA 40; DEVICE, MEDICAL EXAMINATION, AC POWERED Back to Search Results
Catalog Number ARD568601998
Device Problems Environmental Compatibility Problem (2929); Noise, Audible (3273)
Patient Problem No Code Available (3191)
Event Date 12/30/2017
Event Type  Injury  
Manufacturer Narrative
(b)(4).The issue is investigated by manufacturing site.
 
Event Description
On 20th march, 2018 maquet (b)(4) became aware of an incident with one of surgical lights- lucea 40.As it was stated by customer, power supply related to this surgical light created noise on ctg in delivery room at hospital causing the ctg to register noise from the power supply instead of the baby's heartsound.The issue caused an outcome to a baby during delivery, however the baby recovered quickly after the issue.The issue caused navel nephrogen.(b)(4).
 
Manufacturer Narrative
(b)(4).The issue is still being investigated by manufacturing site.
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
(b)(4).Exemption # e2018005.(b)(4).The issue is still being investigated by manufacturing site.
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
(b)(4).Exemption # e2018005.(b)(4).The issue is still being investigated by manufacturing site.A follow-up medwatch will be submitted when additional information becomes available.
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).A follow-up medwatch will be submitted when additional information becomes available.
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
The issue is still being investigated by manufacturing site.(b)(4).Exemption # e2018005.(b)(4).
 
Event Description
Manufacturer reference problem (b)(4).
 
Manufacturer Narrative
Getinge usa sales, llc (importer) is submitting this report on behalf of the legal manufacturer of the device maquet sas, parc de limère, avenue de la pomme de pi orléans cedex 2, france 45074.Exemption # e2018005.(b)(6).With the complaint at hand, we received an information one of our surgical lights created a disturbance in the operation of a cardotocography (ctg) used in a delivery room at the hospital.The problem was described as ctg indicating values, registered from the power supply instead of the baby¿s heartbeat.This was noticed once the ctg transducers were disconnected and placed next to the getinge device.It has also been stated that heartbeat values were shown as incorrectly increased due to the power supply disturbance.The issue allegedly caused an navel swelling with a baby during delivery, however the baby recovered quickly after.The device involved in the event is lucea 40 examination light.Serial number of the device is ar010200 and defective part number is ard568601998.Manufacturing date is 7th march, 2011 and installation date of the device is unknown.The investigation into the root cause of the problem occurrence has been performed.A request for the defective part return was issued several times but the customer have not responded to any of getinge requests.Unfortunately, due to the fact that this incident is considered to be single and isolated case and it was not possible to receive the defective part, we were not able to confirm the customer allegation nor establish a root cause of the disturbance occurrence.The lucea 40 light has the certificate of conformity cem r130-09-105265-2 with the directive 2004/108/ec regarding electromagnetic compatibility.The emc declaration is also included in the lucea 40 user manual 01711en ed.04 pages 23-24.In summary and based on the information available to date, when the event occurred, the device was being used for the patient treatment.Provided customer allegation could indicate that it failed to meet the manufacturer specification.Given the circumstances and the fact that the issue is found to be single and isolated event getinge does not propose any further action at this time.
 
Event Description
Manufacturer reference problem (b)(4).
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
LUCEA 40
Type of Device
DEVICE, MEDICAL EXAMINATION, AC POWERED
Manufacturer (Section D)
FREDERIC LELEU - MAQUET SAS
parc de limère
avenue de la pomme de pi
orléans cedex 2 45074
FR  45074
MDR Report Key7437044
MDR Text Key105756057
Report Number9710055-2018-00017
Device Sequence Number1
Product Code KZF
Combination Product (y/n)N
PMA/PMN Number
K113679
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,consum
Remedial Action Replace
Type of Report Initial,Followup,Followup,Followup,Followup
Report Date 06/06/2019
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received04/17/2018
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue NumberARD568601998
Was Device Available for Evaluation? Yes
Date Manufacturer Received10/10/2018
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
-
-