COOK INC MULTI-SIDEPORT DUAL CHECK VALVE CATHETER INFUSION SET; DQO CATHETER, INTRAVASCULAR, DIAGNOSTIC
|
Back to Search Results |
|
Catalog Number MCIS-5.0-35-130-15.0 |
Device Problem
Unraveled Material (1664)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 08/04/2018 |
Event Type
malfunction
|
Manufacturer Narrative
|
Concomitant medical products: 5fr ((b)(4)) terumo introducer, terumo stiff guidewire, amplatz superstiff guidewire.Pma/510(k) number = pre-amendment.This report includes information known at this time.A follow-up report will be submitted should additional relevant information become available.
|
|
Event Description
|
It was reported, the multi-sideport dual check valve catheter infusion set displayed "an excessive elastic elongation with risk of rupture" upon removal from the patient's anatomy.During the procedure to treat a right femoral-popliteal obstruction with local fibrinolytic treatment, there was difficulty in advancing the complaint device from the humeral access to the right femoral-popliteal obstruction.Per the complainant, the patient had diffuse aortic and iliac calcifications but no tortuosity of the vasculature.After removal of the complaint device, the procedure was completed using a second catheter of the same type.A section of the device did not remain inside the patient¿s body.The patient did not require any additional procedures due to this occurrence.According to the initial reporter, the patient did not experience any adverse effects due to this occurrence.According to the complainant, the complaint device will not be returned to the manufacturer for investigation.
|
|
Manufacturer Narrative
|
Investigation-evaluation: a review of the complaint history, drawings, device history record, documentation, manufacturing instructions, and quality control was conducted during the investigation.The complaint device was not returned; therefore, no physical examination could be performed.However, a document-based investigation was performed.There is no evidence to suggest the finished product was not made to specifications.Review of the device history record of the finished product shows no nonconforming events that could contribute to this failure mode.A complaint history search revealed that there was one other reported complaints for this lot number.Based on the information provided, no product returned, and the results of our investigation, a definitive root cause could not be determined.Per the [quality engineering] risk assessment, no further action is required.Monitoring will continue to be performed for similar complaints.
|
|
Event Description
|
No additional information regarding the patient and/or event has been received since the previous medwatch report was sent.
|
|
Search Alerts/Recalls
|
|
|