• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER ORTHOPAEDICS-MAHWAH ALUMINA C-TAPER HEAD 28MM/+5; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER ORTHOPAEDICS-MAHWAH ALUMINA C-TAPER HEAD 28MM/+5; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS Back to Search Results
Catalog Number 17-2805E
Device Problems Break (1069); Fracture (1260)
Patient Problems Erosion (1750); Inflammation (1932); Injury (2348); Reaction (2414)
Event Date 07/09/2008
Event Type  Injury  
Manufacturer Narrative
The information in this report was provided by stryker orthopaedics legal affairs department.No additional information is available at this time due to the ongoing litigation.Should additional information become available, the evaluation summary will be submitted in a supplemental report.An event regarding fracture involving a ceramic head was reported.The event was confirmed by medical review.Method & results: -product evaluation and results: not performed as the device was not returned.-clinician review: a review of the provided medical records by a clinical consultant concluded: ¿no readable post-operative x-ray of the primary right total hip arthroplasty prior to the (b)(6) 2008 post head fracture films to allow for evaluation of the initial acetabular position and seating of the alumina insert are available for review.In a ceramic/ceramic bearing a vertical acetabular position can contribute to mechanical failure.Delay in revision surgery from the time of the diagnosis of the ceramic bearing failure on (b)(6) 2008 until surgery on (b)(6) 2008 with the patient remaining active was largely responsible for the excessive fragmentation, metallosis, and diffuse distribution of the particular debris.There is nothing unique in the stryker products compared to competitive ceramic/ceramic bearings that contributed to the complications in this case which were increased by delay in revision surgery.Based upon the information available for review, no determination can be made regarding the cause of the initial fracture of the ceramic bearing four years after implantation in this case.¿ - product history review: a device history review confirmed all devices accepted into finished goods conformed to specification.-complaint history review: no other events were reported for the lot indicated.Conclusions: the investigation confirmed the alleged fracture of the ceramic head however, the root cause could not be determined.Further information is needed to complete the investigation for determining root cause.The medical review indicated, ¿in a ceramic/ceramic bearing a vertical acetabular position can contribute to mechanical failure.Delay in revision surgery from the time of the diagnosis of the ceramic bearing failure on (b)(6) 2008 until surgery on (b)(6) 2008 with the patient remaining active was largely responsible for the excessive fragmentation, metallosis, and diffuse distribution of the particular debris.¿ no further investigation for this event is possible at this time.If devices and/or additional information become available to indicate further evaluation is warranted, this record will be reopened.Not available.
 
Event Description
It was reported through the attorney for the patient, as a result of a lawsuit, that allegedly the patient received a trident ceramic on ceramic hip system.It was further alleged that, the patient began to experience some difficulties, requiring a revision surgery on (b)(6) 2008.Update as per medical review: "on (b)(6) 2008 a revision of the right total hip was performed with removal of loose, fractured ceramic pieces.Extensive metallosis was noted and a revision total hip was performed for a diagnosis of fractured ceramic head and liner, displaced metal liner, erosion superior acetabular shell, and extensive wear debris.".
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ALUMINA C-TAPER HEAD 28MM/+5
Type of Device
PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS
Manufacturer (Section D)
STRYKER ORTHOPAEDICS-MAHWAH
325 corporate drive
mahwah NJ 07430
Manufacturer (Section G)
STRYKER ORTHOPAEDICS-CORK
ida industrial estate
carrigtwohill NA
Manufacturer Contact
juana hiciano
325 corporate drive
mahwah, NJ 07430
2018315000
MDR Report Key7902506
MDR Text Key121494454
Report Number0002249697-2018-03010
Device Sequence Number1
Product Code LZO
UDI-Device Identifier07613327101171
UDI-Public07613327101171
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K971409
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type consumer,other
Reporter Occupation Other
Type of Report Initial
Report Date 09/24/2018
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received09/24/2018
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Expiration Date07/31/2008
Device Catalogue Number17-2805E
Device Lot Number6380003
Was Device Available for Evaluation? No
Date Manufacturer Received08/28/2018
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured07/22/2003
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Hospitalization; Required Intervention;
Patient Age49 YR
Patient Weight76
-
-