Model Number INNOVANCE D-DIMER |
Device Problems
Off-Label Use (1494); Low Test Results (2458)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 10/09/2018 |
Event Type
malfunction
|
Manufacturer Narrative
|
The customer contacted a siemens customer care center (ccc) to report that a discordant, falsely low d-dimer result was obtained on a patient sample on a sysmex ca-1500 system using the innovance d-dimer reagent.The customer properly filled the sample, it was not lipemic, icteric or hemolyzed.Siemens determined that quality controls (qcs) were within expected ranges on the day of event.Siemens determined that inadequate mixing, centrifuging or other sample handling issues could be the contributing factors to the discordant result.Inadequate sample mixing can lead to erroneous results due to micro clots or latent fibrin formation in the plasma portion of the sample.The customer did not report issues with any other assays on this instrument.The cause of the discordant, falsely low d-dimer result is unknown.The reagent is performing according to specifications.No further evaluation of the device is required.
|
|
Event Description
|
A discordant, falsely low d-dimer result was obtained on a patient sample when the sample was diluted and repeated on a sysmex ca-1500 system, using the innovance d-dimer reagent.When the sample was initially run, a higher d-dimer result was obtained on the patient sample.The discordant result was reported to the physician(s) and recalled before the physician(s) saw the result.The sample was repeated multiple times on the same system under different sample ids, resulting higher.The repeat result of 4.09 was reported, as the correct result, to the physician(s).There are no known reports of patient intervention or adverse health consequences due to the discordant, falsely low d-dimer result.
|
|
Manufacturer Narrative
|
Additional information (29-oct-2018): a siemens customer service engineer (cse) was dispatched to the customer's site.During this visit, the cse ran a precision study and quality controls on the sysmex ca-1500 system; the precision study and quality controls recoveries were within expected ranges.Siemens further investigated the issue and determined that the customer was using reaction cuvettes that were not validated by siemens on the sysmex ca-1500 system.Siemens cannot determine if the use of these cuvettes contributed to the discordant, falsely low d-dimer result; the customer indicated that they are in the process of converting the non-validated reaction cuvettes with validated reaction cuvettes.Siemens also determined that there were no mechanical errors on the day of the event.The cause of the discordant, falsely low d-dimer result is unknown.The reagent is performing according to specifications.No further evaluation of the device is required.
|
|
Search Alerts/Recalls
|
|