Concomitant medical products: 6fr pediatric scope, wire guide, 4fr stent.Occupation: other healthcare professional.Pma/510k # ¿ exempt pre-amendment.(b)(4).This report includes information known at this time.A follow up report will be submitted should additional relevant information become available.
|
It is reported during a cystoscopy with retrogrades using a 6fr pediatric cystoscope and a cook open-end ureteral catheter, several pieces of the ureteral catheter broke off in the bladder.The surgeon was able to retrieve all of the pieces during the same procedure using graspers.After removing the pieces, the surgeon placed a wire guide, then placed a 4fr stent with fluoro and injected to complete the procedure.The patient experienced no adverse effects as a result of this alleged product malfunction.Additional patient specific details were requested, however the complaint facility stated that they could not release patient specific information.
|
Blank fields on this form indicate the information is unchanged, unknown or unavailable.A review of the complaint history, device history record, dimensional verification, review of drawing, review of quality control, review of specifications, visual inspection were conducted during the investigation.A visual examination of the complaint device found: the distal end was rough with a slightly pinched appearance, black discoloration was observed on the distal edge of the tip, the catheter was kinked 22.5 centimeters (cm) from the distal tip, and that the catheter was scraped starting at the distal tip.The length of the scrape measures 12 cm.There were no loose shavings found on the catheter.A document based investigation evaluation was also performed.A review of the device history record found there were no related anomalies.A search of complaint record found no other complaints associated with this lot number.A review of production processes and controls identified there were sufficient inspection activities and controls in place to ensure product quality prior to distribution.The catheter was observed have material removed from it in a line for 12cm, starting at the distal tip.The area of missing material appears like a scrape and is the likely sources of the separated pieces of the device.It is possible the catheter came into contact with another device during the procedure.The total length of the returned device measured 70cm, which is the original specification length, indicating a section of the device did not separate across the circumference.Based on the information provided and the results of the investigation, a definitive cause could not be established.The appropriate personnel have been notified.Per the quality engineering risk assessment no further action is required cook will continue to monitor for similar complaints this report is required by the fda under 21 cfr part 803 and is based on unconfirmed information submitted by others.Neither the submission of this report nor any statement contained herein is intended to be an admission that any cook device is defective or malfunctioned, that a death or serious injury occurred, nor that any cook device caused, contributed to, or is likely to cause or contribute to a death or serious injury if a malfunction occurred.
|