MAUDE Adverse Event Report: TERUMO CARDIOVASCULAR SYSTEMS CORPORATION CDI BLOOD PARAMETER MONITORING SYSTEM 500; MONITOR, BLOOD-GAS, ON-LINE, CARDIOPULMONARY BYPASS-CDI BPM SYSTEM 500

Model Number 500AVHCT

Device Problem Smoking (1585)

Patient Problem No Patient Involvement (2645)

Event Date 05/08/2019

Event Type  malfunction  

Manufacturer Narrative

The srt replaced the defective lcd backlight driver.The unit operated to the manufacturer's specifications.If additional information becomes available on this complaint that would alter the facts and/or conclusion, a supplemental report will be filed accordingly.

Event Description

The service repair technician (srt) reported that during routine testing of the device at the service center, the damaged liquid crystal display (lcd) back light driver is causing smoke and a blank display while turning on the unit.There was no patient involvement.

Manufacturer Narrative

During laboratory analysis, the product surveillance technician (pst) observed evidence of high surface temperature associated with electrical shorts on the transformer.Power was reaching the transformer and increasing the temperature when power is applied.The highest observed temperature coincides with the discolored region observed.Ac output was zero volts (v).The transformer on the inverter had failed.If additional information becomes available on this complaint that would alter the facts and/or conclusion, a supplemental report will be filed accordingly.

Manufacturer Narrative

The reported complaint was confirmed.Per supplier evaluation, there was a black shrink wrap, about 2 and 3/4 inches, applied to the inverter, covering the inverter from the high voltage section back to the integrated circuits (ic).This was removed and it was noticed that the return wire was broken and burnt.The breakage of the wire was most likely from handling or flexing of the printed circuit board (pcb) during installation or when heat shrink was applied.The burning was from operation of the inverter after the wire breakage.It was determined that the broken return wire was the reason of the inverter failure.If additional information becomes available on this complaint that would alter the facts and/or conclusion, a supplemental report will be filed accordingly.

• Brand Name: CDI BLOOD PARAMETER MONITORING SYSTEM 500
• Type of Device: MONITOR, BLOOD-GAS, ON-LINE, CARDIOPULMONARY BYPASS-CDI BPM SYSTEM 500
• Manufacturer (Section D): TERUMO CARDIOVASCULAR SYSTEMS CORPORATION; 6200 jackson road; ann arbor MI 48103
• MDR Report Key: 8655558
• MDR Text Key: 146544831
• Report Number: 1828100-2019-00285
• Device Sequence Number: 1
• Product Code: DRY
• UDI-Device Identifier: 00886799001646
• UDI-Public: (01)00886799001646(11)170221
• Combination Product (y/n): N
• PMA/PMN Number: K133658
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative
• Type of Report: Initial,Followup,Followup
• Report Date: 10/24/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 05/30/2019
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Other
• Device Model Number: 500AVHCT
• Device Catalogue Number: 500AVHCT
• Was Device Available for Evaluation?: Yes
• Was the Report Sent to FDA?: No
• Date Manufacturer Received: 10/08/2019
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1