Model Number ZCT300 |
Device Problem
Inadequacy of Device Shape and/or Size (1583)
|
Patient Problems
Visual Disturbances (2140); No Code Available (3191)
|
Event Type
Injury
|
Manufacturer Narrative
|
Date of event: unknown, not provided, but the best estimate date is between 4/11/2019 and 5/8/2019.(b)(4).All pertinent information available to johnson and johnson surgical vision has been submitted.
|
|
Event Description
|
It was reported that tecnis toric intraocular lens (model zct300 +17.5 diopter) was explanted from patient¿s right eye in a secondary surgical procedure because of wrong power and the patient experiencing specific visual issues.Reportedly lens with same model and higher diopter of +18.5 was used as replacement for the patient.Patient was doing well at discharge.No further information provided.
|
|
Manufacturer Narrative
|
Device available for evaluation: yes.Returned to manufacturer on: 7/2/2019.Device returned to manufacturer: yes.Device evaluation: the product was returned to the manufacturing site for evaluation.Visual inspection with the unaided eye shows the product is cut in pieces, most probably to make explant possible.Considering the condition of the lens additional analysis is not possible.The complaint cannot be confirmed.Manufacturing record review: the manufacturing records for the intraocular lens were reviewed.The product was manufactured and released according to specification.A search on complaints related to this production order was conducted in the complaint system.The search revealed that no similar complaints were received for this production order number.Conclusion: as a result of the investigation there is no indication of a product quality deficiency.All pertinent information available to johnson & johnson surgical vision, inc.Has been submitted.
|
|
Manufacturer Narrative
|
This correction mdr is being submitted to address inaccurate information in section f on the xml version of the previous submission caused by a software glitch in the transmission process.The internal non-conformance numbers for this software issue are nr-0148919 and capa-010215.
|
|
Search Alerts/Recalls
|