|
Model Number 45758 |
Device Problems
Flushing Problem (1252); Difficult to Remove (1528)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 06/11/2019 |
Event Type
malfunction
|
Event Description
|
Dobhoff feeding tubes: since a few months ago, staff reporting issues that after insertion and x-ray confirmation of placement, the guide wire is unable to be removed.Staff also reporting that they are able to flush tube prior to insertion but not after insertion.No change in practice or process.This has occurred at least 10 times, 7 that we area able to confirm with the same lot number.Upon investigation, staff reporting 6-8 times last month that they experienced difficulty, but thought it was their insertion techniques.This has occurred in our hospital and in our long-term acute care hospital (ltach) unit.We have about 4 tubes with packaging that we will be returning to the company.No patients have been directly injured in these incidents: however, they have had to have the tubes removed, replaced, have another x-ray to verify placement.This has caused some delay to initiation of medications and or feedings, but again, no harm or adverse outcome to patients.We reported a similar event about a year ago.Manufacturer response for tube, feeding, halyard (per site reporter).The stock of tubes with the affected lot number have been removed and will be replaced by the company.We will be returning the tubes and packaging to the manufacturer.
|
|
Event Description
|
Since a few months ago, staff reporting issues that after feeding tube insertion and x-ray confirmation of placement, the guide wire is unable to be removed.Staff also reporting that they are able to flush tube prior to insertion but not after insertion.No change in practice or process.This has occurred at least 10 times, 7 that we are able to confirm with the same lot number.Upon investigation, staff reporting 6-8 times last month that they experienced difficulty, but thought it was their insertion techniques.This has occurred in our hospital and in our long-term acute care hospital (ltach) unit.We have about 4 tubes with packaging that we will be returning to the company.No patients have been directly injured in these incidents: however, they have had to have the tubes removed, replaced, have another x-ray to verify placement.This has caused some delay to initiation of medications and or feedings, but again, no harm or adverse outcome to patients.We reported a similar event about a year ago.Manufacturer response for tube, feeding, halyard (per site reporter).The stock of tubes with the affected lot number have been removed and will be replaced by the company.We will be returning the tubes and packaging to the manufacturer.
|
|
Event Description
|
Since a few months ago, staff reporting issues that after feeding tube insertion and x-ray confirmation of placement, the guide wire is unable to be removed.Staff also reporting that they are able to flush tube prior to insertion but not after insertion.No change in practice or process.This has occurred at least 10 times, 7 that we are able to confirm with the same lot number.Upon investigation, staff reporting 6-8 times last month that they experienced difficulty, but thought it was their insertion techniques.This has occurred in our hospital and in our long-term acute care hospital (ltach) unit.We have about 4 tubes with packaging that we will be returning to the company.No patients have been directly injured in these incidents: however, they have had to have the tubes removed, replaced, have another x-ray to verify placement.This has caused some delay to initiation of medications and or feedings, but again, no harm or adverse outcome to patients.We reported a similar event about a year ago.Manufacturer response for tube, feeding, halyard (per site reporter).The stock of tubes with the affected lot number have been removed and will be replaced by the company.We will be returning the tubes and packaging to the manufacturer.
|
|
Event Description
|
Since a few months ago, staff reporting issues that after feeding tube insertion and x-ray confirmation of placement, the guide wire is unable to be removed.Staff also reporting that they are able to flush tube prior to insertion but not after insertion.No change in practice or process.This has occurred at least 10 times, 7 that we are able to confirm with the same lot number.Upon investigation, staff reporting 6-8 times last month that they experienced difficulty, but thought it was their insertion techniques.This has occurred in our hospital and in our long-term acute care hospital (ltach) unit.We have about 4 tubes with packaging that we will be returning to the company.No patients have been directly injured in these incidents: however, they have had to have the tubes removed, replaced, have another x-ray to verify placement.This has caused some delay to initiation of medications and or feedings, but again, no harm or adverse outcome to patients.We reported a similar event about a year ago.The device involved in this report was a halyard product, not a medtronic product as previously described.Manufacturer response for tube, feeding, halyard (per site reporter).The stock of tubes with the affected lot number have been removed and will be replaced by the company.We will be returning the tubes and packaging to the manufacturer.
|
|
Event Description
|
Since a few months ago, staff reporting issues that after feeding tube insertion and x-ray confirmation of placement, the guide wire is unable to be removed.Staff also reporting that they are able to flush tube prior to insertion but not after insertion.No change in practice or process.This has occurred at least 10 times, 7 that we area able to confirm with the same lot number.Upon investigation, staff reporting 6-8 times last month that they experienced difficulty, but thought it was their insertion techniques.This has occurred in our hospital and in our long-term acute care hospital (ltach) unit.We have about 4 tubes with packaging that we will be returning to the company.No patients have been directly injured in these incidents: however, they have had to have the tubes removed, replaced, have another x-ray to verify placement.This has caused some delay to initiation of medications and or feedings, but again, no harm or adverse outcome to patients.We reported a similar event about a year ago.The device involved in this report was a halyard product, not a medtronic product as previously described.Manufacturer response for tube, feeding, halyard (per site reporter).The stock of tubes with the affected lot number have been removed and will be replaced by the company.We will be returning the tubes and packaging to the manufacturer.
|
|
Search Alerts/Recalls
|
|
|