Catalog Number 305490 |
Device Problem
Break (1069)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 09/25/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
Date of event: unknown.The date received by manufacturer has been used for this field.Device expiration date: unknown.A device evaluation is anticipated, but has not yet begun.Upon completion of the investigation, a supplemental report will be filed.Device manufacture date: unknown.Unknown manufacturer: there are multiple bd locations where this unspecified bd device may have been manufactured.A catalog and lot number could not be confirmed for this incident and without this information we are unable to determine where the device was manufactured.Therefore, bd corporate headquarters in (b)(4) has been listed and the (b)(4) fda registration number has been used for the manufacture report number.
|
|
Event Description
|
It was reported that the sharps coll 8.2qt red vented cap experienced a permanent lid lock, and difficult assembly -lid does not fit collector.Product defects were noted prior to use.The following information was provided by the initial reporter: material no: 305490.Batch no: unknown.Per customer email: i need directions on how to properly dispose of one of your sharps containers that has a manufacturing error.The lid on this container was cut off too short and is missing the plastic part that seals/locks the container.We have not used the container or put any sharps inside.
|
|
Manufacturer Narrative
|
Investigation: at this point an investigation cannot be completed as not enough information is available.No pictures of damaged/broken tab.No lot number is available to investigate caps received.Dhr could not be reviewed.
|
|
Event Description
|
It was reported that the sharps coll 8.2qt red vented cap experienced a permanent lid lock, and difficult assembly -lid does not fit collector.Product defects were noted prior to use.The following information was provided by the initial reporter: material no: 305490, batch no: unknown.Per customer email: i need directions on how to properly dispose of one of your sharps containers that has a manufacturing error.The lid on this container was cut off too short and is missing the plastic part that seals/locks the container.We have not used the container or put any sharps inside.
|
|
Search Alerts/Recalls
|