• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: OLYMPUS MEDICAL SYSTEMS CORP. CYLINDER HOSE WITH SWITCH-OVER VALVE (PIN-INDEX)

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

OLYMPUS MEDICAL SYSTEMS CORP. CYLINDER HOSE WITH SWITCH-OVER VALVE (PIN-INDEX) Back to Search Results
Model Number MAJ-1985
Device Problem Gas/Air Leak (2946)
Patient Problem Burn(s) (1757)
Event Date 11/11/2019
Event Type  Injury  
Manufacturer Narrative
Olympus medical systems corp.(omsc) could not investigate the subject maj-1985, because the subject maj-1985 was not returned to omsc.Based on the report from okm, omsc supposed that the reported phenomenon was attributed to gas leakage due to the use of the incorrect o-ring by the user.The instruction manual of the subject device provide replacement procedure for o-ring, description regarding the correct o-ring and cautions.Furthermore the instruction manual of the subject device states the corresponding method in case of an abnormality.
 
Event Description
The user replaced the o-ring of the subject maj-1985.During the unspecified procedure with the subject device, co2 leaked from the subject device.When the nurse touched the co2 cylinder side of the subject device for reconnect the subject device, the nurse got cold burn.The local service engineer of olympus keymed ltd.(okm) reported the following.There was no serious problem of the injured nurse.The local service engineer checked the subject device at the facility and found that the reported phenomenon (co2 leak) was reproduced, furthermore the incorrect o-ring (non-olympus) was fitted to the yoke (connector for gas cylinder) of the subject device.The local service engineer replaced the incorrect o-ring of the subject device to the correct o-ring designated by olympus, then the subject device functioned without any problem.The local service engineer advised the facility that the correct o-ring designated by olympus should be used.There was no report of the patient injury other than above.
 
Manufacturer Narrative
This is a supplemental report for mfr report #8010047-2019-04140.Olympus medical systems corp.(omsc) could not investigate the subject maj-1985, because the subject maj-1985 was not returned to omsc.Based on the report from olympus keymed ltd, omsc surmised that the cause of this phenomenon was the following factor.The co2 leak occurred due to the use of the incorrect o-ring by the user and it caused that the tip of the cylinder of the subject device was cooled down.Consequently when the nurse touched the cylinder side of the subject device for reconnect the subject device, the nurse got cold burn.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
CYLINDER HOSE WITH SWITCH-OVER VALVE (PIN-INDEX)
Type of Device
CYLINDER HOSE
Manufacturer (Section D)
OLYMPUS MEDICAL SYSTEMS CORP.
2951 ishikawa-cho
hachioji-shi, tokyo-to 192-8 507
JA  192-8507
MDR Report Key9400699
MDR Text Key185226783
Report Number8010047-2019-04140
Device Sequence Number1
Product Code HIF
UDI-Device Identifier04953170324208
UDI-Public04953170324208
Combination Product (y/n)N
PMA/PMN Number
K110294
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,foreig
Type of Report Initial,Followup
Report Date 01/29/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received12/03/2019
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberMAJ-1985
Was Device Available for Evaluation? No
Was the Report Sent to FDA? No
Date Manufacturer Received01/06/2020
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Outcome(s) Other;
-
-