Catalog Number M490008 |
Device Problem
Fail-Safe Did Not Operate (4046)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 11/06/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
The hardware investigation has begun but it has not been completed at this time.When the investigational analysis has been completed, a supplemental 3500a report will be submitted.Biosense webster manufacturer's reference number (b)(4) has two reports related to the same event: (1) mfr # 2029046-2019-03952 for product code d134702 (thermocool® smart touch® sf uni-directional navigation catheter) for the adverse event.(2) mfr # 2029046-2019-03953 for product code m490008 (smartablate¿ system irrigation pump (us) for the undetected air bubbles.
|
|
Event Description
|
It was reported that a (b)(6) male patient underwent a paroxysmal atrial fibrillation ablation procedure with a thermocool® smart touch® sf uni-directional navigation catheter and suffered cardiac arrest requiring cardiopulmonary resuscitation.An issue of undetected air bubbles was reported against the smartablate¿ system irrigation pump (us).The patient went into cardiac arrest about 30 seconds after the ablation catheter went through the new baylis deflectable sheath and was resuscitated by cardiopulmonary resuscitation.The patient was stable and transferred to the coronary care unit (ccu) for observation.The patient required extended hospitalization but has had no residual effects.Per the last update, the patient was still in the hospital, off of the ventilator and doing well.The physician is unsure of the causality of the event and there were several factors he considered including the patient¿s condition.Initially it was reported that the patient had an air embolism that was believed to come from the mapping catheter.The physician isn¿t certain that the patient indeed had an air embolus; that was his initial thought just after the case, but in the days after the incident, he did not verbalize his certainty about this event.Air embolism was suspected because the scrub tech thought he saw a ¿small air bubble¿ in the tubing after it was primed.He and the radiology tech saw it at which time they opened the stopcock and visualized it exit out the stopcock with the fluid and filled the sterile solution bowl.The pump did not sound an alarm.
|
|
Manufacturer Narrative
|
On 12/20/2019, the complaint details were re-reviewed and determined that the issue of undetected air bubbles reported against the smartablate¿ system irrigation pump (us) is no longer considered to be an mdr reportable malfunction.Based on the information available if the tubing was primed and the flush mode was used, this would cause the bubble detection to be turned off.The finding of bubbles post pump in the tubing is not an abnormal finding, the bubbles need to be cleared out.The pump not alarming is not a malfunction.Manufacturer¿s ref # (b)(4).
|
|
Search Alerts/Recalls
|