MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 MEC POP-ON L 100BX

Model Number 32104

Device Problems Nonstandard Device (1420); Physical Resistance/Sticking (4012)

Patient Problems Tissue Damage (2104); No Consequences Or Impact To Patient (2199); Discomfort (2330)

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.

Event Description

It was reported that the product was unable to roll down and adhered to itself.When the male external catheter was able to roll on to the patient, it stuck to the skin and caused discomfort upon removal.

Manufacturer Narrative

The reported event was unconfirmed.Visual inspection noted 200 unopened pop-on mecs received.Visual evaluation noted no obvious defects.An adhesive peel test was performed and the samples were tested according to the standard, aql- 1.0, the samples were cut to the required width (0.70" +/- 0.05").The adhesive peel strength was found to be within specification (0.80-2.80lbf).One sample broke the frame and did not generate a result, therefore an additional sample was tested.The product was not used for diagnosis or treatment.The product met specifications.It was determined that the product had no relationship to the event due to the investigation being unconfirmed through sample evaluation.The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use were found adequate and state the following: ¿description/indication the self-adhering male external catheter is designed for the management of male urinary incontinence.Contraindication do not use on irritated or compromised skin.Precaution do not use if allergic reaction occurs.For good hygiene, change catheter daily.Use of a single device for longer periods than 24 hours may increase the risk of complications.Directions: to apply 1) wash penis with mild soap and warm water.Dry thoroughly.2) trim pubic hair if necessary.3) open package at perforation.4) to remove plastic insert, squeeze catheter at the top of the white cone and pull to release.5) unroll self-adhering catheter over penis.6) gently squeeze the catheter to properly seal adhesive to the skin.7) connect to collection bag.Important: wear time may be significantly reduced if adhesive is not properly sealed to the skin.Directions: to remove gently roll catheter off the penis.Note: if necessary, apply a warm wet compress (such as a wet washcloth) around the catheter to help loosen the adhesive." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.

Event Description

It was reported that the product was could not roll down and adhered to itself.When the male external catheter was able to roll on to the patient, it stuck to the skin and caused discomfort upon removal.

• Brand Name: MEC POP-ON L 100BX
• Type of Device: MEC
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 9440706
• MDR Text Key: 178596279
• Report Number: 1018233-2019-07837
• Device Sequence Number: 1
• Product Code: NNX
• UDI-Device Identifier: 00801741070501
• UDI-Public: (01)00801741070501
• Combination Product (y/n): N
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,distri
• Type of Report: Initial,Followup
• Report Date: 01/20/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 12/09/2019
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Lay User/Patient
• Device Expiration Date: 03/28/2022
• Device Model Number: 32104
• Device Catalogue Number: 32104
• Device Lot Number: JUBR0834
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/14/2019
• Date Manufacturer Received: 01/19/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1