No further information is available on the product at this time.The investigation is ongoing, however if any additional relevant information is identified following completion of the investigation, the additional relevant information will be submitted in a supplemental report.Device not returned.
|
Aspen surgical received a report from the distributor indicating that product was found with seal issues.The actual device was returned for evaluation.The manufacturing lot number along with samples were provided for review.The distributor indicated that the defects were found during incoming inspection.A review of the samples confirmed the issue from the distributor.Analysis of the finished good lot number was reviewed.No non-conformance's were noted during the manufacturing process.According to the manufacturing process, these parts are manually loaded into recessed pockets on a packaging machine per specified work instructions.If incorrectly loaded or not orientated properly, the product interferes with the sealing process.Therefore a likely root cause for the defect may be attributed to an operator error.The ifu which is received with the product, along with the pouch label, identifies this failure mode with the symbol "do not use if package is damaged".This indicates that the device should not be used if the products sterile barrier system or its packaging is compromised.Additionally, production supervisors and operations were notified of this issue.Based on this information, no further action is required.
|