• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: VERATHON MEDICAL ULC GLIDESCOPE,TITANIUM, LOPRO,T3; LARYNGOSCOPE, RIGID

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

VERATHON MEDICAL ULC GLIDESCOPE,TITANIUM, LOPRO,T3; LARYNGOSCOPE, RIGID Back to Search Results
Model Number 0574-0126
Device Problems Erratic or Intermittent Display (1182); Electrical Shorting (2926)
Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)
Event Date 02/13/2020
Event Type  malfunction  
Manufacturer Narrative
The device return is anticipated, however; at the time of the report the device has not been received by verathon.Verathon continues to investigate the reported event and a supplemental report will be submitted in accordance with 21 cfr 803.56 when additional information becomes available.
 
Event Description
The customer reported that while intubating a patient during an emergency care procedure, using a glidescope titanium lopro t3, the blade would continually short out and the screen would go black.No delay in the procedure, use of a backup device, or harm to the patient or user was reported.
 
Manufacturer Narrative
D10, g4, g7, h2, h3, h6, h10.The glidescope titanium lopro t3 was returned to verathon for evaluation.A verathon technical service representative evaluated the returned glidescope titanium lopro t3 and confirmed the intermittent image issue.It was noted that the blade connector was corroded.The glidescope titanium lopro t3 was scrapped and a replacement blade was sent to the customer.No corrective action is required at this time.Verathon will continue to monitor for trends.The glidescope video laryngoscopes operations and maintenance manual (omm) states: "using hospital-grade clean air, which is free from oils and residuals found in common compressed air, blow out the connectors.This dries the connectors and removes any remaining residuals." it is likely that not blowing out the connector with hospital-grade air caused or contributed to the corrosion in hdmi connector.Verathon followed up with the customer and restated the importance of blowing out the connectors following the reprocessing of the blades.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
GLIDESCOPE,TITANIUM, LOPRO,T3
Type of Device
LARYNGOSCOPE, RIGID
Manufacturer (Section D)
VERATHON MEDICAL ULC
2227 douglas road
burnaby, british columbia V5C 5 A9
CA  V5C 5A9
MDR Report Key9820873
MDR Text Key189991023
Report Number9615393-2020-00039
Device Sequence Number1
Product Code CCW
Combination Product (y/n)N
PMA/PMN Number
EXEMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type health professional,user faci
Type of Report Initial,Followup
Report Date 02/13/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Date FDA Received03/11/2020
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number0574-0126
Device Catalogue Number0574-0147
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer05/08/2020
Date Manufacturer Received05/13/2020
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
-
-