MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARDEX® LUBRI-SIL® I.C. TEMPERATURE-SENSING ALL-SILICONE FOLEY CATHETER; TEMPERATURE SENSING CATHETER (LATEX)

Model Number 119314

Device Problems Inaccurate Flow Rate (1249); No Flow (2991)

Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)

Event Date 03/02/2020

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete, a supplemental report will be filed.

Event Description

It was reported that there was no urine flow from the catheter.

Manufacturer Narrative

The reported event was unconfirmed since the reported failure could not be reproduced.Visual evaluation of the returned sample noted one opened (without original packaging), dome drain bag with connected inlet tubing, sample port connector, and 3-way temperature sensing silicone foley catheter.Visual inspection of the sample noted no obvious visible defects.The drainage lumen of the catheter was disconnected from the sample port connector and flushed with methylene blue solution (3 drops 1% aq methylene blue per 100ml of distilled water) with no leakage or other issues noted.The inlet tubing was also flushed with methylene blue solution (3 drops 1% aq methylene blue per 100ml of distilled water) and flowed into the drainage bag as intended with no leakage or other issues noted.This is within specification per inspection procedure which states, "the material must not occlude the irrigation and inflation notch neither the eyes when molding the tip." a device history record review was not required per the investigation.The instructions for use were found adequate and state the following: "[warnings] 1.Method for use (1) do not inflate the balloon in the urethra.[the urethra may be injured.] (2) do not pull the catheter hard.[the bladder/urethra may be injuryed.] 2.Applicable patients patients with delirium who might pull out catheter [when patient tugs at catheter unconsciously, the bladder and urethra may be damaged.] [contraindications] 1.Method for use: (1) do not reuse (2) do not resterilize (3) this device contains 10% povidine-iodine.For patients with past history of allergic hypersensitivity to povidone-iodine or iodine, consider using alternative disinfectants.(4) be careful that the catheter is not exposed to ointments, contract medium or oil-based lubricants (including vegetable oils such as olive oil, mineral oils such as white petrolatum and animal oils).[they may damage the device and may burst balloon.] (5) do not hold the device with forceps, etc.Avoid contact with any blades or sharp-edged instruments.[catheter damage may cause balloon rupture and accidental balloon removal or failure to deflate or remove the balloon.] directions for use: 1) clean the area around the external urethral meatus with the packaged cotton balls immersed in the antiseptics.2) lubricate the catheter shaft with the lubricant jelly.3) carefully insert the catheter into the urethral meatus.After the balloon advanced in the bladder, attach the needleless syringe, and gently infuse the specified volume of sterile water to inflate the balloon.4) pull the catheter slightly to seat the balloon at the level of the bladder neck.5) to deflate and remove the balloon, attach a needleless syringe to let sterile water in the balloon come out spontaneously through balloon deflation without aspiration.After balloon deflation, withdraw the catheter slowly while confirming that no abnormal resistance is encountered." h11:section a through f - the information provided by bd represents all of the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.

Event Description

It was reported that there was no urine flow from the catheter.

• Brand Name: BARDEX® LUBRI-SIL® I.C. TEMPERATURE-SENSING ALL-SILICONE FOLEY CATHETER
• Type of Device: TEMPERATURE SENSING CATHETER (LATEX)
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• MDR Report Key: 9914245
• MDR Text Key: 187540085
• Report Number: 1018233-2020-02228
• Device Sequence Number: 1
• Product Code: MJC
• UDI-Device Identifier: 00801741039843
• UDI-Public: (01)00801741039843
• Combination Product (y/n): N
• PMA/PMN Number: K070582
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: distributor,other
• Type of Report: Initial,Followup
• Report Date: 05/08/2020

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Date FDA Received: 04/01/2020
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: 119314
• Device Catalogue Number: 119314
• Device Lot Number: NGDV1939
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/30/2020
• Date Manufacturer Received: 05/04/2020
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1