|
Model Number 72203160 |
Device Problem
Flaked (1246)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 03/13/2020 |
Event Type
Injury
|
Manufacturer Narrative
|
(b)(6).
|
|
Event Description
|
It was reported that during surgery the twist drill gave of lots of metal debris when drilling anchor holes, all the metal was removed from the joint.The procedure was successfully completed using a back-up device.A delay of 5 minutes was reported.No patient injury or other complications were reported.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.
|
|
Manufacturer Narrative
|
H3, h6: one 72203160 twist drill for 2.3mm suture anchors was used for treatment but was not returned for evaluation.Instructions for use (ifu) contains precautionary statements and recommendations for proper use of product.The instrument is intended to flex but not bend.The flex cable composition is reactive to inadvertent torque overload (sudden starts and stopping or switching between forward and reverse rotations), twisting and bending.Per ifu ¿these instruments are intended for repeated use with proper care and handling.As with any surgical instrument, careful attention must be exercised to ensure that excessive force is not placed on the instrument.Excessive force can result in instrument failure.Maintaining guide alignment throughout drilling is required to ensure drill bit integrity.It is recommended to drill in one continuous motion to prepare the site.Sudden starting and stopping of the drill bit in the bone may cause drill bit breakage.Note: the depth stop on the drill bit for the suture anchor bottoms out on the proximal end of the curved guide when proper hole depth is reached.¿ complaint history review indicated no similar allegations for the lot number reported.Batch review did not indicate a condition, product or procedure failure that supported the allegation.No root cause related to the manufacture of the device was confirmed.Product met specifications upon release to distribution.No further investigation is warranted at this time.
|
|
Search Alerts/Recalls
|
|
|