MAUDE Adverse Event Report: WILSON-COOK MEDICAL INC ACUSNARE POLYPECTOMY SNARE; FDI, SNARE, FLEXIBLE

Catalog Number AS-1-S

Device Problem Failure to Conduct (1114)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/14/2023

Event Type  malfunction  

Manufacturer Narrative

The investigation is on-going.A follow-up emdr will be provided within 30 days of submission of this report.

Event Description

During an unknown endoscopic procedure, the physician used a cook acusnare polypectomy snare.It was reported [that the] user advanced device into patient to the target area and captured the polyp, but found out there is no electricity with power on.User then changed to a similar device to complete the procedure.A section of the device did not remain inside the patient¿s body.The patient did not require any additional procedures due to this occurrence.According to the initial reporter, the patient did not experience any adverse effects due to this occurrence.

Manufacturer Narrative

Section g: pma/510(k):k173673 the product was returned to the approved supplier for evaluation and the investigation is on-going.Once additional information has been received a follow-up emdr report will be provided.

Manufacturer Narrative

Investigation evaluation: the product said to be involved was returned in a white plastic bag with an open pouch from the lot number provided in the report.The label matches the product returned.Photos provided show the clear side of the pouch with the snare head advanced, the labeling that matches that in the report, and the cautery pin.Our laboratory evaluation of the product said to be involved could not confirm the report as it was described.The device was returned with the snare retracted into the sheath.The device would advance and retract as intended when the handle was manipulated.The continuity from the electrical pins to the snare head was tested with an ohm meter and passed.An additional functional test with the device was performed by attaching the active cord to the electrical pin.The active cord connected to the device easily and remained securely connected.The device was connected to a valley lab generator and power was applied.The snare cut and coagulated simulated tissue as expected.Upon further investigation, an unrelated nonconformance was identified with the device.Specifically, the sheath length was incorrect.This nonconformance would not impact the device's ability to conduct current so the investigation will be completed in another record.The device history record for the lot number said to be involved was reviewed.A discrepancy or anomaly was not observed with the product that was released for distribution.Investigation conclusion: our functional evaluation of the device did not confirm the report.When tested with simulated tissue the returned device operated as expected.A definitive cause for this observation could not be determined because the actual use conditions could not be duplicated in the laboratory setting.Due to a variety of clinical conditions such as patient anatomy, endoscope position or progression of disease state, we could not reproduce the actual conditions of product usage during our laboratory analysis.This limits our ability to conclusively determine a cause.One possible cause of this report is use with an incompatible active cord.The ifu states "this device must only be used with an active cord compatible with a 3 mm diameter connector.This device has only been verified to be compatible with the following cook active cords: acu-1 and acu-1-vl (supplied non-sterile)." the instructions for use contain the following additional information to assist with proper set-up and use of the device: "before using this device, follow the recommendations provided by the electrosurgical unit manufacturer to ensure patient safety through the proper placement and utilization of the patient return electrode.Ensure that a proper path from the patient return electrode to the electrosurgical unit is maintained throughout the procedure." "inspect the active cord.The cord must be free of kinks, bends, breaks and exposed wires to allow for the accurate transfer of current.If an abnormality is noted, do not use the active cord." "securely connect the active cord to the device handle and electrosurgical unit.The active cord fittings should fit snugly into both the device handle and electrosurgical unit.Following the instructions from the electrosurgical unit manufacturer, position the patient return electrode and connect it to the electrosurgical unit." "following electrosurgical unit manufacturer's instructions for settings, verify the desired settings and activate the electrosurgical unit.Note: the maximum rated input voltage for this device is 2kvp-p for cut mode and 5 kvp-p for coagulation mode." prior to distribution, all acusnare polypectomy snares are subjected to a visual inspection and functional testing to ensure device integrity.A review of the device history record confirmed that the lot said to be involved met all manufacturing requirements prior to shipment.Corrective action: a review of the complaint history was conducted.The likelihood of occurrence is considered rare.Corrective action is not warranted at this time based on the quality engineering risk assessment.Quality assurance will continue to monitor for complaint trends and reassess the risk assessment results as post market feedback continues to become available.

• Brand Name: ACUSNARE POLYPECTOMY SNARE
• Type of Device: FDI, SNARE, FLEXIBLE
• Manufacturer (Section D): WILSON-COOK MEDICAL INC; 4900 bethania station rd; winston-salem NC 27105
• Manufacturer (Section G): COOK ENDOSCOPY; 4900 bethania station rd; winston-salem NC 27105
• Manufacturer Contact: sabrina o'brien ; 4900 bethania station rd; winston-salem, NC 27105 ; 3367440157
• MDR Report Key: 18348441
• MDR Text Key: 331058291
• Report Number: 1037905-2023-00622
• Device Sequence Number: 1
• Product Code: FDI
• UDI-Device Identifier: 00827002226296
• UDI-Public: (01)00827002226296(17)260726(10)W4749449
• Combination Product (y/n): N
• PMA/PMN Number: K851958
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Company Representative,Distributor
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 02/02/2024
• 2 Devices were Involved in the Event: 1 2

1 Patient was Involved in the Event

• Date FDA Received: 12/18/2023
• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: AS-1-S
• Device Lot Number: W4749449
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/05/2023
• Date Manufacturer Received: 01/12/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 07/26/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: ENDOSCOPE - UNKNOWN MAKE AND MODEL