|
Date of Entry
|
Specialty Task Group Area
|
Recognition Number
|
Extent of Recognition
|
Standards Developing Organization
|
Standard Designation Number and Date
|
Standard Title (click for recognition information)
|
07/06/2020 |
ObGyn/ Gastroenterology/ Urology |
9-125 |
Complete |
ISO CIE |
11664-2 S 014-2/E First edition 2007-10-15 Corrected version 2008-11-01 |
Colorimetry - Part 2: CIE standard illuminants |
07/09/2014 |
Orthopedic |
11-276 |
Complete |
ASTM |
F1798-13 |
Standard Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants |
12/23/2016 |
Orthopedic |
11-314 |
Complete |
ISO |
14242-2 Second edition 2016-09-15 |
Implants for surgery - Wear of total hip-joint prostheses - Part 2: Methods of measurement |
12/23/2016 |
Orthopedic |
11-316 |
Complete |
ASTM |
F1264-16 |
Standard Specification and Test Methods for Intramedullary Fixation Devices |
12/23/2016 |
Orthopedic |
11-317 |
Complete |
ASTM |
F3129-16 |
Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
08/21/2017 |
Anesthesiology |
1-124 |
Complete |
ISO |
8835-7 First edition 2011-11-01 |
Inhalational anaesthesia systems - Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases |
12/23/2019 |
General Plastic Surgery/ General Hospital |
6-425 |
Complete |
ASTM |
F2100-19 |
Standard Specification for Performance of Materials Used in Medical Face Masks |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-147 |
Complete |
ISO CIE |
11664-2 First edition 2022-08 |
Colorimetry - Part 2: CIE standard illuminants |
09/21/2016 |
InVitro Diagnostics |
7-266 |
Complete |
CLSI |
EP19 2nd Edition (Replaces EP19-R) |
A Framework for Using CLSI Documents to Evaluate Clinical Laboratory Measurement Procedures |
08/14/2015 |
Sterility |
14-463 |
Complete |
ISO ASTM |
51608 Second edition 2015-03-15 |
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 KeV and 7.5 MeV |
04/04/2016 |
General Plastic Surgery/ General Hospital |
6-355 |
Complete |
ASTM |
D3772-15(2021) |
Standard Specification for Industrial Rubber Finger Cots |
01/27/2015 |
Radiology |
12-230 |
Complete |
NEMA |
XR 24-2008 (R2014) |
Primary user controls for interventional angiography x-ray equipment |
01/27/2015 |
Radiology |
12-286 |
Complete |
NEMA |
XR 27 Amendment 1-2013 |
X-ray equipment for interventional procedures - User Quality Control Mode |
06/07/2018 |
Ophthalmic |
10-106 |
Complete |
ISO |
18369-3 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 3: Measurement Methods |
01/30/2014 |
Dental/ ENT |
4-137 |
Complete |
ISO |
6877 Second edition 2006-04-01 |
Dentistry - Root-canal obturating points |
ANSI ADA |
Standard No. 78-2013 |
Dental obturating cones |
12/18/2023 |
Dental/ ENT |
4-310 |
Complete |
ISO |
22112 Second edition 2017-08 |
Dentistry - Artificial teeth for dental prostheses |
ANSI ADA |
Standard No. 15-2021 |
Artificial Teeth for Dental Prostheses |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-148 |
Complete |
ISO CIE |
11664-6 Second edition 2022-08 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
01/30/2014 |
Dental/ ENT |
4-151 |
Complete |
ISO |
22112 First edition 2005-11-01 |
Dentistry - Artificial teeth for dental prostheses |
ANSI ADA |
Standard No. 15-2008 (R2013) |
Artificial Teeth for Dental Prostheses |
06/07/2018 |
Ophthalmic |
10-107 |
Complete |
ISO |
18369-4 Second edition 2017-08 |
Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials |
09/17/2018 |
Orthopedic |
11-326 |
Complete |
ASTM |
F384-17 |
Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices |
09/17/2018 |
Orthopedic |
11-327 |
Complete |
ASTM |
F543-17 |
Standard Specification and Test Methods for Metallic Medical Bone Screws |
09/17/2018 |
Orthopedic |
11-329 |
Complete |
ASTM |
F2180-17 |
Standard Specification for Metallic Implantable Strands and Cables |
07/26/2016 |
Biocompatibility |
2-213 |
Complete |
ASTM |
F1904-14 |
Standard Practice for Testing the Biological Responses to Particles In Vivo |
05/29/2023 |
Orthopedic |
11-399 |
Complete |
ASTM |
F1357-23 |
Standard Specification for Articulating Total Wrist Implants |
08/14/2015 |
Orthopedic |
11-294 |
Complete |
ASTM |
F1357-14 (Reapproved 2019) |
Standard Specification for Articulating Total Wrist Implants |
12/18/2023 |
Cardiovascular |
3-190 |
Complete |
ISO |
PAS 7020 First edition 2023-05 |
Sizing parameters of surgical valve prostheses: Requirements regarding the application of ISO 5840-2 |
04/04/2016 |
Sterility |
14-337 |
Complete |
ISO |
14937 Second edition 2009-10-15 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
ANSI AAMI ISO |
14937:2009/(R)2013 |
Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation, and routine control of a sterilization process for medical devices |
06/07/2018 |
Materials |
8-113 |
Complete |
ASTM |
F1147-05 (Reapproved 2017)e1 |
Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings |
07/06/2020 |
ObGyn/ Gastroenterology/ Urology |
9-128 |
Complete |
ISO CIE |
11664-6 First edition 2014-02-01 |
Colorimetry - Part 6: CIEDE2000 colour-difference formula |
09/17/2018 |
Orthopedic |
11-324 |
Complete |
ASTM |
F366-17 |
Standard Specification for Fixation Pins and Wires |
09/17/2018 |
Orthopedic |
11-325 |
Complete |
ASTM |
F564-17 |
Standard Specification and Test Methods for Metallic Bone Staples |
06/07/2018 |
Radiology |
12-315 |
Complete |
NEMA |
MS 8-2016 |
Characterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging Systems |
08/21/2017 |
General I (QS/ RM) |
5-107 |
Complete |
IEC |
80369-5: Edition 1.0 2016-03 |
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications.[Including Corrigendum 1 (2017) and Corrigendum 2 (2021)] |
ANSI AAMI ISO |
80369-5:2016 |
Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications |
06/07/2018 |
Nanotechnology |
18-10 |
Complete |
ISO |
29701 First edition 2010-09-15 |
Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test. |
04/04/2016 |
Materials |
8-408 |
Complete |
ASTM |
F3122-14 |
Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
08/21/2017 |
Materials |
8-457 |
Complete |
ISO |
13175-3 First edition 2012-10-01 |
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
12/21/2020 |
Dental/ ENT |
4-265 |
Complete |
ISO |
10271 Third edition 2020-08 |
Dentistry - Corrosion test methods for metallic materials |
ANSI ADA |
Standard No. 97-2020 |
Corrosion Test Methods for Metallic Materials |
01/27/2015 |
Dental/ ENT |
4-218 |
Complete |
ISO |
27020 First edition 2010-12-15 |
Dentistry - Brackets and tubes for use in orthodontics |
ANSI ADA |
Standard No.100-2012 |
Orthodontic Brackets and Tubes |
12/23/2019 |
Radiology |
12-329 |
Complete |
IEC |
60601-2-43 Edition 2.2 2019-10 CONSOLIDATED VERSION |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
05/29/2023 |
Biocompatibility |
2-301 |
Complete |
ASTM |
F1983-23 |
Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications |
01/30/2014 |
Dental/ ENT |
4-188 |
Complete |
ISO |
9917-2 Second edition 2010-04-15 |
Dentistry - Water-based cements - Part 2: Resin-modified cements |
05/29/2023 |
ObGyn/ Gastroenterology/ Urology |
9-149 |
Complete |
IEC |
60601-2-39 Edition 3.0 2018-04 |
Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
|
05/29/2023 |
Radiology |
12-351 |
Complete |
IEC |
60601-2-43 Edition 3.0 2022-12 |
Medical electrical equipment - Part 2-43: Particular requirements for the safety and essential performance of X-ray equipment for interventional procedures |
12/18/2023 |
Dental/ ENT |
4-313 |
Complete |
ISO |
27020 Second edition 2019-06 |
Dentistry - Brackets and tubes for use in orthodontics |
ANSI ADA |
Standard No.100-2020 |
Orthodontic Brackets and Tubes |
09/17/2018 |
Orthopedic |
11-197 |
Complete |
ASTM |
F983-86 (Reapproved 2018) |
Standard Practice for Permanent Marking of Orthopaedic Implant Components |
09/17/2018 |
Orthopedic |
11-199 |
Complete |
ASTM |
F565-04 (Reapproved 2018) |
Standard Practice for Care and Handling of Orthopedic Implants and Instruments |
09/17/2018 |
Orthopedic |
11-322 |
Complete |
ASTM |
F1541-17 |
Standard Specification and Test Methods for External Skeletal Fixation Devices |
12/18/2023 |
Radiology |
12-352 |
Complete |
NEMA |
PS 3.1 - 3.20 2023e |
Digital Imaging and Communications in Medicine (DICOM) Set |
01/14/2019 |
Tissue Engineering |
15-47 |
Complete |
ISO |
22442-3 First edition 2007-12-15 |
Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) Agents. |
08/21/2017 |
General II (ES/ EMC) |
19-25 |
Complete |
IEC |
62485-1 Edition 1.0 2015-04 |
Safety requirements for secondary batteries and battery installations - Part 1: General safety information. |