| | Class 2 Device Recall Pentax |  |
| Date Initiated by Firm | January 29, 2025 |
| Date Posted | February 26, 2025 |
| Recall Status1 |
Open3, Classified |
| Recall Number | Z-1238-2025 |
| Recall Event ID |
96164 |
| 510(K)Number | K231249 |
| Product Classification |
Endoscope, accessories, image post-processing for color enhancement - Product Code PEA
|
| Product | Pentax Medical Video Processor- Intended to be used with PENTAX Medical endoscopes, monitors and other peripheral devices for endoscopic diagnosis, treatment, and video observation.
Model: EPK-i8020c |
| Code Information |
UDI: 04961333247974
Serial Numbers:
B0023Z1193
B0023Z1195
B0023Z1245
B0023Z1247
B0023Z1250
B0023Z1255
B0023Z1256
B0023Z1276
B0023Z1277
B0023Z1279
B0023Z1280
B0023Z1286
B0023Z1290
B0023Z1296
B0023Z1313
B0023Z1335
B0023Z1451
B0023Z1461
B0023Z1478
B0023Z1481
B0023Z1565
B0023Z1573
B0023Z1628
B0023Z1631
B0023Z1637
B0023Z1639
B0023Z1645
B0023Z1648
B0023Z1652
B0023Z1653
B0023Z1655
B0023Z1656
B0023Z1659
B0023Z1661
B0023Z1665
B0023Z1667
B0023Z1669
B0023Z1671
B0023Z1676
B0023Z1678
B0023Z1682
B0023Z1694
B0023Z1696
B0023Z1698
B0023Z1711
B0023Z1712
B0023Z1716
B0023Z1717
B0023Z1732
C0023Z0021
C0023Z0072
C0023Z0074
C0023Z0078
C0023Z0082
C0023Z0084
C0023Z0085
C0023Z0087
C0023Z0091
C0023Z0092
C0023Z0094
C0023Z0095
C0023Z0096
C0023Z0097
D0023Z0011
D0023Z0017
D0023Z0108
D0023Z0109
D0023Z0112
D0023Z0117
D0023Z0118
D0023Z0119
D0023Z0122
D0023Z0123
D0023Z0125
D0023Z0140
D0023Z0142
D0023Z0222
D0023Z0241
D0023Z0248
D0158Z0019
D0158Z0033
D0158Z0049
D0158Z0053
E0023Z0002
E0023Z0004
E0023Z0007
E0023Z0008
E0023Z0009
E0023Z0013
E0023Z0016
E0023Z0018
E0023Z0020
E0023Z0024
E0023Z0026
|
Recalling Firm/ Manufacturer |
Pentax of America Inc 3 Paragon Dr Montvale NJ 07645-1782
|
| For Additional Information Contact | SAME 973-628-2199 |
Manufacturer Reason for Recall | During endoscopic procedures using a combination of the video processor EPK-i8020c and the i20c series video endoscope, the observed image can become reddish or dark (1.8%). Users have observed smoke-like steam and noted that the light guide at the tip is hot during use / after the endoscope is removed from the patient, and may cause thermal injury to the patient's mucous membranes. |
FDA Determined Cause 2 | Device Design |
| Action | Pentax issued URGENT i20c Endoscope User Notification-Precautions when using PENTAX Medical i20c endoscopes with EPK-i8020c Processor Letter on 1/29/25 certified USPS Mail. The letter states reason for recall, health risk and action to take:
Customer Instructions:
Perform a pre-use inspection according to the Instructions for Use to make sure that there are no foreign objects, scratches, chips, or other abnormalities on the light guide.
Do not use OE (Optical Enhancement) mode in cases where there is bleeding such as hematemesis or hematochezia, or where a lot of bleeding was observed during an endoscopic examination or procedure. Use normal observation mode and set the illumination brightness to the minimum necessary.
If you notice any abnormalities, such as the observed image being reddish or darker than normal, discontinue use and immediately remove the endoscope from the patient while keeping the endoscope at a distance from the mucous membrane. The temperature at the tip of the endoscope could rise and may cause thermal injury to the patient's mucous membranes. After removing the endoscope, turn off the video processor lamp. Check the distal end of the endoscope, remove any attached patient material, and confirm that the light guide is normal before using it again. If you cannot completely remove all patient material from the distal end of the endoscope, discontinue use and contact PENTAX Medical service facility and request repairs.
Please download the Instructions for use (IFU) from the PENTAX Medical online IFU library at https://ifu.pentaxmedical.com for the following products: Models EPK-i8020c; EC38-i20cL; EG29-i20c.
Further Actions by PENTAX Medical:
PENTAX Medical is currently considering countermeasures that will help to further reduce the potential risks mentioned above. PENTAX Medical will duly notify you when we are ready to implement the changes.
Contact Information:
Please indicate through the attached response form that you have received and |
| Quantity in Commerce | 94 units |
| Distribution | Nationwide
|
| Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.
|
| 510(K) Database | 510(K)s with Product Code = PEA
|
|
|
|