• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

Class 2 Device Recall Centrella Smart Bed

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 


New Search Back to Search Results
 Class 2 Device Recall Centrella Smart Bedsee related information
Date Initiated by FirmJune 30, 2020
Create DateJuly 30, 2020
Recall Status1 Terminated 3 on October 20, 2022
Recall NumberZ-2738-2020
Recall Event ID 85925
Product Classification Bed, ac-powered adjustable hospital - Product Code FNL
ProductCentrella Smart+ Bed, Catalog No. P7900 - Product Usage: intended to be used to treat or prevent pulmonary or other complications associated with immobility; to treat or prevent pressure ulcers; or for any other use where medical benefits may be derived from either Continuous Lateral Rotation Therapy or Percussion/Vibration Therapy.
Code Information Serial Numbers Affected: V133PF2502 through V142PF3819 and manufactured between May 12, 2020 and May 21, 2020
Recalling Firm/
Manufacturer
Hill-Rom, Inc.
1069 State Road 46 E
Batesville IN 47006-7520
For Additional Information ContactHill Rom Technical Support
800-445-3720
Manufacturer Reason
for Recall
Affected beds may have screws installed that do not meet material tensile strength requirements. Failure of this screw could result in serious patient or user injury.
FDA Determined
Cause 2
Nonconforming Material/Component
ActionOn June 30, 2020, the firm mailed Urgent Medical Device Correction Notice letters to affected customers. Customers received letters with Centrella Smart+ Beds or Progressa Beds in the subject line depending on which affected products they had received. Customers were informed of the potential safety issue regarding nonconforming screws used in the beds, which may cause the frame to fail and lead to serious injury to the patient. Customers were instructed to do the following: 1. Until your affected beds are updated, Hill-Rom is urging customers to follow the instructions outlined below: -Caution your users that when utilizing the bed articulation functions, if there is any binding during movement or deformation in the frame, to take the bed immediately out of service until the bed is updated. -Follow the safety information as outlined in the Instructions for Use each time when setting the brakes. If the brakes do not hold after following the instructions, immediately take the bed out of service until the bed is updated. -Caution your users that after placing the bed in steer mode and beginning transport, if there is any difficulty with aligning one of the casters in the trailing position and maintaining control, take the bed immediately out of service until the bed is updated. -Follow the Instructions for Use each time when raising a siderail to the latched position. If the siderails are not latching properly, take the bed immediately out of service until the bed is updated. 2. Complete the response form attached to the notification and return it to Hill-Rom. 3. Contact Hill-Rom at 800-445-3720 or us.service@hillrom.com if you have any questions. 4. Hill-Rom will be reaching out to you to assist with the planning of your bed(s) correction. Hill Rom will follow-up with a phone call if they have not received a reply within 10 days. Hill-Rom will contact you to schedule your correction. The correction will need to be completed without a patient
Quantity in Commerce1033
DistributionWorldwide distribution - US nationwide distribution including in the states of AR, AZ, CA, DE, IN, KY, MD, ME, MI, MO, NC, NM, NY, OH, OK, PA, SC, TN, TX, VA, WA, WI, WV and the country of Canada.
Total Product Life CycleTPLC Device Report

1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
-
-