| | Class 2 Device Recall STATCheck |  |
| Date Initiated by Firm | March 26, 2004 |
| Date Posted | July 20, 2004 |
| Recall Status1 |
Terminated 3 on July 07, 2004 |
| Recall Number | Z-0895-04 |
| Recall Event ID |
28689 |
| 510(K)Number | K982215 |
| Product Classification |
Ventilator, Emergency, Manual (Resuscitator) - Product Code BTM
|
| Product | STAT-Check Infant Disposable Manual Resuscitators with Built-in Pressure Monitor, , with 40 cmHO Pressure Limiting System & Pressure Port Adapter, Single Patient Use, Non-Sterile, Re-Order SC7100 Series, Non Latex, Ventlab Corporation, 155 Boyce Drive, Mocksville, NC 27028, (336) 753-5000, (336) 753-5002 FAX. |
| Code Information |
Model #SC7101B, 4040-02, 4078-04, Model #SC7101C, Lot #3295-04 |
Recalling Firm/ Manufacturer |
Ventlab Corporation 155 Boyce Dr Mocksville NC 27028
|
| For Additional Information Contact | Robert M. Kelly 336-492-2636 |
Manufacturer Reason for Recall | In some cases the device may develop small cracks that could expand over time and result in reduced shelf life or other failure. |
FDA Determined Cause 2 | Other |
| Action | Consignees were notified by letter on 3/26/2004. |
| Quantity in Commerce | 60 units |
| Distribution | CA |
| Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
| 510(K) Database | 510(K)s with Product Code = BTM
|
|
|
|