|
Class 2 Device Recall Medtronic Surgical Membrane Oxygenator |
|
Date Initiated by Firm |
October 17, 2008 |
Date Posted |
February 09, 2009 |
Recall Status1 |
Terminated 3 on April 19, 2011 |
Recall Number |
Z-0975-2009 |
Recall Event ID |
50161 |
Product Classification |
Surgical Membrane Oxygenator - Product Code DTZ
|
Product |
Medtronic Surgical Membrane Oxygenator.
Mis-printed Label: Medtronic 1-4500-2A, Recommended maximum blood flow range 5.0 - 8.5 L/min, Sterilized Using Ethylene Oxide, REF 61399402655, Manufacturer: Medtronic Inc., Minneapolis, MN 55432-5604.
Surgical Membrane Oxygenators are intended to be used in an extracorporeal perfusion circuit to oxygenate and remove carbon dioxide from the blood during routine cardiopulmonary bypass procedures. Additionally, the Integral Membrane Oxygenators are intended to cool and warm the blood by means of the integral heat exchange.
|
Code Information |
Lot Numbers: 10058759, 9984675, 9956368, 9916066, 989741, 9875810, 9866275, 9854094, 9828585, 9812351, 9421573, 9169873, 9044915, 8956269, 8938159, 8885755 and 8765243. Serial Numbers: IH31608 - IH32031. |
Recalling Firm/ Manufacturer |
Medtronic Inc 710 Medtronic Pkwy Minneapolis MN 55432-5603
|
For Additional Information Contact |
763-505-2562
|
Manufacturer Reason for Recall |
Medtronic has identified an issue with the labeling of the I-4500 Silicone Oxygenators (P/N 61399402655). Lot numbers of this oxygenator manufactured between August 2007 and September 2008 have an incorrect "Recommended maximum blood flow range" on the label. The label on the device states a range of 5.0 - 8.5 L/min but should state a range of 5.0 - 6.5 L/min. These oxygenators are acceptable t
|
FDA Determined Cause 2 |
Error in labeling |
Action |
A consignee letter " Urgent Medical Deive Notice" dated October 17, 2008 was sent to the impacted customers on October 17, 2008. The letter described the issue and product and confirmed the correct maximum internal flow of 6.5 L/min for the I-4500 Silicone Oxygenators. The letter states the product will not be removed from the field. Customers were instructed to complete the" Medtronic Product Notification Certificate (FCA 0903)" acknowledging receipt of the information and fax the completed certificate to 763-391-9603. Please direct questions about the recall to your Medtronic Sales Representative or call 763-391-9124. |
Quantity in Commerce |
408 |
Distribution |
Worldwide Distribution USA including states of CA, CO, FL, IL, IN, KY, LA, MD, MI, MN, MO, NV, NJ, NY, OH, OK PA, TN, TX, UT, VA, and WI, and countries of LATVIA, ITALY, ARMENIA, RUSSIAN FEDERATION, POLAND, CHILE and CHINA. |
Total Product Life Cycle |
TPLC Device Report
|
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
|
|
|