|
Class 3 Device Recall Access Hybritech Free PSA |
 |
Date Initiated by Firm |
October 11, 2011 |
Date Posted |
May 22, 2012 |
Recall Status1 |
Terminated 3 on March 18, 2013 |
Recall Number |
Z-1645-2012 |
Recall Event ID |
61770 |
Product Classification |
Test,prostate specific antigen,free,(noncomplexed) to distinguish prostate cancer from benign condit - Product Code MTG
|
Product |
Access Hybritech Free PSA, Part Number: 37210
Free PSA is used to aid in the differentiation between prostate cancer and benign prostatic conditions when total PSA levels are between 4 and 10 ng/mL. |
Code Information |
All lots |
Recalling Firm/ Manufacturer |
Beckman Coulter Inc. 250 S Kraemer Blvd Brea CA 92821-6232
|
For Additional Information Contact |
Clair K. O'Donovan, Ph.D. 714-961-4483
|
Manufacturer Reason for Recall |
A recall was initiated because Beckman Coulter has confirmed a change to the recommended diluents for the Access Hybritech free PSA reagent.
|
FDA Determined Cause 2 |
Process design |
Action |
Beckman Coulter sent a Product Correction letter dated October 11, 2011, to all affected customers. The letter identified the product the problem and the action needed to be taken by the customer.
Customers were instructed regarding a change to the recommended diluents for the Access Hybritech free PSA reagent. Patient safety is not affected by this change.
" Do not dilute elevated free PSA patient samples with Wash Buffer II.
" Do not dilute elevated free PSA patient samples using the UniCel DxI onboard dilution feature.
" Dilute elevated free PSA samples with Access Hybritech free PSA Calibrator S0 only.
" A review of historical patient results is not required because there is no effect on clinical interpretation.
* The UniCel DxI onboard dilution feature is only available in limited geographies.
" An updated version of the UniCel DxI Assay Protocol File (APF) will remove the Access Hybritech free PSA (dfPSA) onboard dilution assay from the list of available assays.
" The Access Hybritech free PSA IFU will be updated to remove Wash Buffer II as an acceptable diluent for elevated patient samples. Correct any procedure manuals or other documents created in your laboratory that list Wash Buffer II as an acceptable diluent for the Access Hybritech free PSA assay.
Please share this information with your laboratory staff. If you have forwarded any of the affected product listed above to another laboratory, please provide a copy of the letter to them.
Please complete and return the enclosed response form within 10 days so we are certain you received this important communication.
If you have any questions regarding this notification, please contact our Customer Support Center
" Via our website, http://www.beckmancoulter.com/customersupport/support
" Via phone, call 1-800-854-3633 in the United States and Canada
Outside the United States and Canada, contact your local Beckman Coulter Representative. We apologize for the inconvenie |
Quantity in Commerce |
90,965 units total (24,951 units in US) |
Distribution |
Worldwide Distribution -- USA (nationwide ) and the countries of Algeria, Angola, Argentina, Armenia, Australia, Austria, Bangladesh, Belgium, Bosnia, Herzegovina, Brazil, Bulgaria, Canada, China, Colombia, Costa Rica, Croatia, Czech Republic, Djibouti, Ecuador, Egypt, El Salvador, Ethiopia, Finland, France, French, Polynesia, Georgia, Germany, Greece, Hong Kong, Hungary, India, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kuwait, Lebanon, Libyan, Arab, Jamahiriya, Macao, Mexico, Moldova, Republic of Morocco, Myanmar, Namibia, Netherlands, New Zealand, Nigeria, Oman, Panama, Philippines, Poland, Puerto Rico, Qatar, Romania, Russian Federation, Saudi Arabia, Serbia, Singapore, Slovakia, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, Turkey, Ukraine, United Arab, Emirates, United Kingdom, Uruguay ,Venezuela, Viet Nam, Yemen and Zimbabwe. |
Total Product Life Cycle |
TPLC Device Report
|
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
|
|
|