|
Class 2 Device Recall Spacelabs Healthcare Ventilator Flexport Interface |
 |
Date Initiated by Firm |
May 09, 2014 |
Date Posted |
June 18, 2014 |
Recall Status1 |
Terminated 3 on November 16, 2015 |
Recall Number |
Z-1824-2014 |
Recall Event ID |
68374 |
510(K)Number |
K903702
|
Product Classification |
Oximeter - Product Code DQA
|
Product |
Spacelabs Healthcare Ventilator Flexport Interface, Model 90436A-07 |
Code Information |
Serial Numbers Distributed in the US: 436A000660, 436A000663, 436A000664, 436A000666, 436A000667, 436A000669, 436A004306, 436A004307, 436A004308, 436A004309, 436A004310, 436A006122, 436A006123, 436A006441, 436A006442, 436A006443, 436A006444, 436A006452, 436A006573, 436A006589, 436A006590, 436A006591, 436A006592, 436A006593, 436A006594, 436A006595, 436A006596, 6A006597, 436A006598, 436A006599, 436A006600, 436A006601, 436A00670, 436A006966 436A01020, 436A02086, 436A02087, 436A02088, 436A02234, 436A02246, 436A02247, 436A02281, 436A02282, 436A02283, 436A03237 and 436A03238. Serial Numbers Distributed Outside the US: 436A003628, 436A003629, 436A003630, 436A003631, 436A003632, 436A003633, 436A003634, 436A003635, 436A003636, 436A003637, 436A003638, 436A003639, 436A003640, 436A003644, 436A003645, 436A003646, 436A003647, 436A004162, 436A004166, 436A004197, 436A004198, 436a005205, 436a005471, 436a005472, 436A005638, 436A005641, 436A005642, 436A006087, 436A006088, 436A006151, 436A006193, 436A006248, 436A006249, 436A006250, 436A006262, 436A006389, 436A006390, 436A006397, 436A006445, 436A006446, 436A006522, 436A006523, 436A006524, 436A006570, 436A006571, 436A006572, 436A006609, 436A006610, 436A006611, 436A006612, 436A006613, 436A006614, 436A006616, 436A006617, 436A006618, 436A006619, 436A006620, 436A006621, 436A006624, 436A006625, 436A006950, 436A006951, 436A01023, 436A01094, 436A01095, 436A01096, 436A01097, 436A01098, 436A01099, 436A01100, 436A01101, 436A01102, 436A01103, 436A01104, 436A01105, 436A01106, 436A01107, 436A01108, 436A01129, 436A01152, 436A01190, 436A01191, 436A01192, 436A01193, 436A01194, 436A01195, 436A01197, 436A01199, 436A01200, 436A01212, 436A01213, 436A01217, 436A01298, 436A02023, 436A02024, 436A02025, 436A02026, 436A02027, 436A02188, 436A02233, 436A02262, 436A02264, 436A02590, 436A02591, 436A02592, 436A03193, 436A03239, and 436A03500. |
Recalling Firm/ Manufacturer |
Spacelabs Healthcare Inc 35301 SE Center St Snoqualmie WA 98065-9216
|
For Additional Information Contact |
800-522-7025 Ext. 2
|
Manufacturer Reason for Recall |
Spacelabs Healthcare is voluntarily recalling the Hamilton Galileo Ventilator Flexport, Model 90436A-07, where the monitored Minute Volumes (Vmin) has been reported at one time to reach ten times the actual value on the bedside monitor.
|
FDA Determined Cause 2 |
Component change control |
Action |
Spacelabs changed their strategy for updating the software and sent the updated letter Urgent-Medical Device Correction- Hamilton Galileo Ventilator Flexport
Model 90436A-07, dated 10 June 2015, to their consignees.
The firm is going to send consignees new replacement flexport(s) with upgraded software and requested consignees to return old affected units via Return Goods Authorization (RGA) to Spacelabs and the firm will destroy affected units.
Consignees are instructed to take the following actions:
1. Please replace the affected devices and test for correct operation.
2. Return your old device(s) using the RGA number and prepaid FedX shipping label.
Use the Reference code: and FedEx Return number:
RETURN ADDRESS:
Spacelabs Healthcare, Inc.
35301 SE Center St.
Snoqualmie, WA 98065
(425) 363-5816
If you have any questions about this corrective action program, please call Spacelabs Healthcare at (800) 522-7025 and select 2 for Technical Support.
**********************************************************************************************
Spacelabs recommends that customers immediately advise their staff of this situation and if they continue to use the Flexport, to please keep in mind:
1) Galileo Interface Protocol (GIP) version 1.0 and 1.1 do not affect the flexport readings. Only GIP version 1.2 is an issue.
2) If you have the GIP version 1.2:
-The ventilator alarms continue to work normally at the bedside and central station.
-The ventilator itself is available and working correctly.
-The reported x10 volumes would be an obvious error to the clinician.
Spacelabs Field Service personnel will be contacting all customers to schedule a convenient time to install, at no cost, a software update that resolves this issue. |
Quantity in Commerce |
46 units distributed within the US; 108 units distributed outside the US. |
Distribution |
Worldwide Distribution-USA (nationwide) including the states of AZ, IN, LA, GA, SC, FL, and NY, and 18 customers outside the US. |
Total Product Life Cycle |
TPLC Device Report
|
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
510(K) Database |
510(K)s with Product Code = DQA and Original Applicant = SPACELABS, INC.
|
|
|
|