| Class 2 Device Recall Intravascular Administration Set | |
Date Initiated by Firm | April 20, 2015 |
Date Posted | May 07, 2015 |
Recall Status1 |
Terminated 3 on November 24, 2015 |
Recall Number | Z-1595-2015 |
Recall Event ID |
71028 |
510(K)Number | K964435 |
Product Classification |
Stopcock, i.V. Set - Product Code FMG
|
Product | 98" (249 cm) Transfer Set w/MicroClave T-Connector, 2 Check Valves, Luer Lock, Non-DEHP Tubing, Item No. B3372
Product Usage:
IV Administration sets are intended for the infusion and withdrawal of fluids. The devices are provided sterile. |
Code Information |
Lot No. 3019521 |
Recalling Firm/ Manufacturer |
ICU Medical, Inc. 951 Calle Amanecer San Clemente CA 92673-6212
|
For Additional Information Contact | 949-366-2183 |
Manufacturer Reason for Recall | ICU Medical is recalling MicroClave T-Connectors because they have potential connection separation issues that could lead to leakage. |
FDA Determined Cause 2 | Under Investigation by firm |
Action | An Urgent Medical Device Recall letter dated 4/17/15 will be sent to customers on 4/20/15 to inform them that ICU Medical Inc. has identified a potential connection separation issue in a small number of isolated Intravenous Administration Transfer Sets. While the separation may be visually detected, if used, this failure mode could lead to leakage. The letter informs the customers of the problems identified and the actions to be taken. Customers are instructed to return completed recall response form to ICU Medical by Fax at (801) 264-1755 or email to recall@icumed.com. Customers with questions or require assistance relating to the recall are instructed to contact ICU Customer Service Monday through Friday between the hours of 8:30 AM and 4:00 PM Pacific time: 866-829-9025 and select option 8, or e-mail the following address: customerservice@icumed.com. |
Quantity in Commerce | 50 units |
Distribution | Nationwide in US: SC, NC, MN, CT, KY, MD, FL, VA, TN |
Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
510(K) Database | 510(K)s with Product Code = FMG
|
|
|
|