Date Initiated by Firm | April 07, 2020 |
Create Date | May 26, 2020 |
Recall Status1 |
Terminated 3 on June 13, 2024 |
Recall Number | Z-2115-2020 |
Recall Event ID |
85537 |
510(K)Number | K121012 |
Product Classification |
Calculator/data processing module, for clinical use - Product Code JQP
|
Product | Accelerator a3600 Automation System used with the following Modules: High Volume Storage(P/N FLX-270, FLX-271, FLX-276, FLX-282, FLX-283), HSQ Interface Module (P/N FLX-274), Aliquoter Module (P/N FLX-209), Rack Output Module ROM400 (P/N FLX-289), XN-9000 Interface Module (P/N FLX-290), Advia 2120 LAS Interface Module (P/N FLX-219), Vertical Transportation Module (P/N FLX -204), Rack Input Module (P/N FLX-214), AUWi System Interface Module (P/N FLX-286), Track To Rack Interface Module (P/N FLX-295) - Product Usage: is a modular system designed to automate Pre-Analytical and Post-Analytical processing, sample handling in order to automate sample processing in the Laboratory. The systems consolidate multiple Analytical instruments into a unified workstation. |
Code Information |
Serial Numbers: ACP.050 ACP.146 |
Recalling Firm/ Manufacturer |
Inpeco S.A. Via San Gottardo 10 Lugano Switzerland
|
Manufacturer Reason for Recall | The sensors which activate the safety switches may be affected by delayed activation. In 1% of the cases, the response delay can be up to a maximum delay of 2 seconds, instead of 40ms
expected by design. |
FDA Determined Cause 2 | Component design/selection |
Action | Urgent: Medical Device Correction notification letters dated 3/30/20 were sent to customers.
Action to be taken by the user
After module protection removal, wait at least 2 seconds before accessing the impacted module (listed in Table
1). Your service provider will contact you to replace the sensor. Until the service visit please maintain awareness on this notice.
Please complete and return the "Customer Letter Receipt Confirmation and Implementation Check form" attached to this letter within 15 days directly to the email address specified in the email communication.
Please transfer this notice to whom it might concern.
Contact reference person:
For any clarification you may need, do not hesitate to contact:
Eva Balzarotti - Regulatory Affairs Manager
E-mail: Regulatorv.Affairs@inpeco.com
Phone: (+41) 919118 224 |
Quantity in Commerce | 2 systems |
Distribution | The products were distributed to the following US States: IL and NY. |
Total Product Life Cycle | TPLC Device Report |
|
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls. 2 Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall. 3 For details about termination of a recall see Code of Federal Regulations (CFR) Title 21 §7.55.
|
510(K) Database | 510(K)s with Product Code = JQP
|