Class 2 Device Recall Luminos dRF Max

• Date Initiated by Firm: December 21, 2022
• Date Posted: February 23, 2023
• Recall Status: Open, Classified
• Recall Number: Z-1167-2023
• Recall Event ID: 91649
• 510(K)Number: K173639
• Product Classification: Interventional fluoroscopic x-ray system - Product Code OWB
• Product: Luminos dRF Max with software VE10, VF10, VF11- A diagnostic imaging system for; radiographic and fluoroscopic studie; Model Number:10762471
• Code Information: UDI: 4056869009162 S/N: 5037 5951 Expanded Recall 2/24/23: 5069 5085 5209 5234 5340 5364 5634 5664 5682 5919 5920 5921 5947 5953 5954 5956 5963 7075 7098 7147 7162 7168 7172 7208 7266 7310 7319 7391 7404 7442 7460 7488 7545 7743 7771 8074 8093 8094 8183 8198 8223 8242 8244 8275 8320 8322 8334 8361 8371 8378 8385 8389
• Recalling Firm/ Manufacturer: Siemens Medical Solutions USA, Inc; 40 Liberty Blvd; Malvern PA 19355-1418
• For Additional Information Contact: SAME; 610-219-4834
• Manufacturer Reason for Recall: Potential risk of collision with the ceiling, wall, or objects which may result in serious injury to staff or patients due to room configuration parameters of the system being set to default values
• FDA Determined Cause: Software design
• Action: ***UPDATE*** Siemens issued Urgent Medical Device Correction letter (expansion) via CSAN XP056/22/S to affected customers on 2/24/2023. The CSAN alerts the users to the issue warning them to pay special attention to the travel range of system parts. The CSAN urges users to stop system movement to prevent collision by releasing the movement control or by activating the emergency stop button as described in the system Operator Manual. Field corrective action via XP057/22/S will initiate an onsite visit to the customer facilities by a Siemens Customer Service Engineer to check the room configuration parameters current set on the systems and, if necessary, restore them to the correct values. This service will be provided to the customers free of charge. Customers with software version VF11 will be addressed under a separate and to be determined UI (update to VF11H). If you have any technical questions or desire an earlier appointment, please contact our service organization at 1-800-888-7436. _______________________________ ___________________________________________ Siemens Medical Solutions issued Customer Safety Advisory Notification( CSAN XP053/22/S) beginning on December 21, 2022. Letter states reason for recall, health risk and action to take: When performing unit movements, the user should pay special attention to the travel range of the system parts and stop movement in time to prevent a collision with the ceiling, wall, or objects. System movement can be stopped by releasing the movement control or by activating the emergency stop button as described in the system Operator Manual. Customer Safety Advisory Notice (XP053/22/S) will be distributed to all affected customers. Field corrective action via XP054/22/S will initiate an onsite visit of a Siemens Customer Service Engineer to check the room configuration parameters currently set for your system and if necessary, restore them to the correct values. These visits will be free of charge. The Siemens Service Or
• Quantity in Commerce: 2 units; Expanded recall: 53 units
• Distribution: US Nationwide distribution.
• Total Product Life Cycle: TPLC Device Report

¹ A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated. Learn more about medical device recalls.
² Per FDA policy, recall cause determinations are subject to modification up to the point of termination of the recall.
³ The manufacturer has initiated the recall and not all products have been corrected or removed. This record will be updated as the status changes.

• 510(K) Database: 510(K)s with Product Code = OWB and Original Applicant = Siemens Medical Solutions, Inc